Check the operating volume behind your laundromat opening quote
This laundromat cycle capacity and break-even calculator helps prospective owners review actual rental, equipment and installation quotes before committing to a site.
It works backward from monthly costs to required washing volume, follows the associated drying operations, and checks the load on each machine group during off-peak and peak blocks.
Per-cycle utility consumption and the value of owner work remain visible alongside the quoted budget.
The same revenue can imply different machine requirements when program duration, load and drying attachment change.
Idle hours elsewhere in the day do not remove an evening dryer bottleneck.
Compare up to three operating plans for one site using a pre-tax KRW budget; this model does not forecast customers or future revenue.
Your next actionTake the required wash/dry counts and block-level shortages to the equipment supplier.
Request revised quotes on matching capacity, programs and installation conditions so the alternatives can be compared consistently.
Integer cohorts connect washing to subsequent drying
A cohort is a process bundle
A bundle can contain 10 washes, 8 linked drying cycles and 2 additional drying cycles.
That represents 80% linked drying and 0.2 extra drying cycles per wash, with 10 total dries.
Whole process counts preserve the relationship without rounding a fractional dryer operation into a customer visit.
Paid operations are not unique customers
Washing and drying each generate revenue when separately charged.
The same customer can use both processes or several machines, so their combined cycle count does not measure unique visitors or local demand.
Only the specified paid operations enter revenue and resource consumption.
Use separate rows when capacity, price, program or trading block differs, and connect each row to its washer and dryer groups.
The linked and extra drying operations within one row use the same drying price, duration and consumption values.
If an extra payment buys a shorter extension, first align that unit with the entered paid drying program using a documented equivalent.
Do not combine incompatible program units without checking the conversion with the supplier.
Trading time, equipment groups and monthly mix
- Trading days: Enter 1–31 actual operating days for the month.
Assuming30 days for a shop with closures can understate the required daily volume.
- Off-peak and peak blocks: Enter minutes for two daily blocks, totaling no more than 1,440 minutes.
Cohort rows retain your chosen monthly distribution between those blocks.
- Machine groups: Group independent washers or dryers with matching capacity and daily availability, and identify capacity such as20kg in the name.
Split machines into different groups when their available times differ.
- Downtime: Enter unavailable minutes per machine, per day, in each block.
Per-cycle cleanup belongs in the program duration and should not also be deducted as the same downtime.
- Monthly cohort count: This is both the current volume assumption and the basis for the fixed product/time mix in the break-even calculation.
An unused row can have zero count, but all-zero rows leave no configured mix to scale.
Confirm that one washer load fits the assigned dryer operation for the actual material and program.
Matching nominal weights do not establish identical conditions for bulky bedding and ordinary laundry.
Additional machines are treated as independent units; shared boiler, drainage, water supply and electrical limits require a separate site check.
Per-cycle water, electricity, gas and payment costs
One paid program unit
Water cost = litres ÷ 1,000 × KRW/m³
Electricity cost = kWh × KRW/kWh
Gas cost = consumption in contract units × matching unit rate
Payment fee = paid cycle price × fee percentage ÷ 100
Contribution = price − water − electricity − gas − supplies − payment fee
Use documented or measured consumption for the selected model, program, load and supply conditions.
Heater power in kW is not energy consumed per cycle in kWh.
Gas usage and its quoted rate must share the same unit; do not multiply incompatible volume and energy units.
For water-related variable charges, check which billed components your entered rate covers.
Separate variable usage costs from monthly standing charges.
Including the same bill in both per-cycle rates and monthly other costs duplicates expenses; excluding a fixed charge from both omits it.
Amounts use one consistent pre-tax KRW basis, with no automatic tax or utility-tariff calculation.
Revenue-linked franchise charges and shared utility limits outside the input fields must be reviewed separately.
Separate opening cash from recurring monthly burdens
Opening quote
The recoverable deposit is separated from premium, equipment, interior, installation and other initial spending.
All enter opening cash, but the deposit is not converted into monthly expenses.
The nondeposit initial-cost category does not predict future resale proceeds or guarantee that a premium can be recovered.
Monthly quote
Rent, management, cleaning, repairs, total staff cost, lease, interest and other recurring costs are added together.
Separate one-off joining costs from continuing charges by actual payment frequency.
Check whether an equipment purchase and a lease payment describe distinct obligations.
Owner work is monthly hours multiplied by an entered hourly value, covering activities such as cleaning, customer response, collections and checks.
Avoid counting the same owner pay again if it is already inside staff costs.
Loan principal repayment is deducted separately at the final cash-budget stage.
Covering monthly costs does not mean that the initial equipment investment has been recovered.
Three coverage thresholds retain the fixed mix
- Operating coverage: The smallest volume whose revenue covers variable usage, supplies, payment fees and monthly fixed costs.
- Including owner work: The smallest volume also covering the monthly value of owner labor.
This makes the consequence of treating owner time as free visible.
- Including principal cash: The smallest volume covering the previous burden plus monthly loan principal repayment.
The greatest common divisor of the positive monthly cohort counts produces the smallest whole-number mix.
An off-peak/peak ratio of 2:1 grows in that same ratio rather than shifting all required sales into the more profitable block.
Each threshold rounds the relevant cost burden divided by mix contribution upward to whole bundles and checks the preceding bundle.
A nonpositive mix contribution cannot cover a positive burden by scaling sales.
A genuinely zero burden can require zero bundles, while an all-zero mix remains a separate unconfigured state.
Unknown or invalid required inputs must not become zeros.
Displayed currency rounding is for readability and should not be used to infer a different minimum threshold.
Worked wash-to-dry coverage example
These fictional values use one cohort row to demonstrate the formulas; they are not supplier prices or market averages.
Retaining several rows in a fixed mix, as in the two-block screen example, can change the bundle increment.
Assume a wash price of KRW 6,000, 100L of water at KRW 2,000/m³, 1kWh at KRW 200/kWh, KRW 100 supplies, 0% payment fees and zero gas consumption.
The variable cost is 200 + 200 + 100 = KRW 500 and wash contribution is KRW 5,500.
A dry price of KRW 4,000 with 2kWh at the same rate and zero other usage, supplies or fees gives KRW 400 cost and KRW 3,600 contribution.
Contribution of one linked bundle
10 washes +8 linked dries +2 extra dries =10 washes and 10 dries
10 × KRW 5,500 +10 × KRW 3,600 = KRW 91,000
An80% linked rate plus0.2 extra dries per wash gives the same total dry count as100% linked drying, while retaining the separate assumptions.
Three monthly coverage thresholds with fictional KRW 91,000 bundle contribution| Coverage stage | Monthly burden | Bundles | Washes / dries |
|---|
| Operating fixed costs | KRW 910,000 | 10 | 100 /100 |
| Add KRW 91,000 owner work | KRW 1,001,000 | 11 | 110 /110 |
| Add KRW 91,000 principal cash | KRW 1,092,000 | 12 | 120 /120 |
Across 30 trading days, each process averages approximately 3.333,3.667 or4 cycles per day at the respective threshold.
A fractional daily average is a monthly planning ratio, not a fraction of a physical operation.
If the deposit is KRW 30,000,000 and other initial spending is KRW 100,000,000, opening cash is KRW 130,000,000; it is not automatically amortized into these monthly thresholds.
Check washer turnover and dryer bottlenecks per machine
Resource and block constraints
Available minutes per machine = block minutes − downtime
Monthly supply = machines × available minutes × trading days
Monthly demand = sum of cycles × (run minutes + cleanup minutes)
Identical-duration ceiling = machines × floor(available minutes ÷ occupied minutes) × days
Two machines with 110 available minutes each can complete at most two60-minute operations per day.
Dividing pooled220 minutes by60 would incorrectly suggest three operations by joining spare time from different machines.
Rows with the same occupied duration are aggregated even when their names and prices differ, so splitting rows does not create equipment capacity.
The model checks both total occupied minutes and identical-duration indivisible limits, then reports shortages and a lower bound on extra machines.
If one operation is longer than the available block, adding more machines of that group cannot make that operation fit.
The displayed load percentage compares entered demand with supplied minutes; it is not observed utilization or a forecast sales rate.
Interpret the verdict and sensitivity checks carefully
Entered necessary conditions not violated; detailed feasibility unconfirmed
This verdict does not establish a feasible timetable, waiting time, customer demand or profit.
Mixed-duration placement, wash-before-dry sequencing, common utilities and concentration on particular days remain separate checks.
If a condition is violated, identify its group and block first; absence of a violation does not approve the lease or equipment order.
The downtime sensitivity adds 30 unavailable minutes per machine in each block, capped at the block length.
The 100% linked-drying sensitivity raises linked drying to the wash count and preserves extra drying.
Drying revenue, consumption, required coverage volume and machine load can all change together, so read the cash and capacity results side by side.
Neither sensitivity assigns a probability to that scenario.
A practical input and comparison sequence
- Collect actual rental, equipment, fit-out and installation quotes, utility contract rates and program consumption records.
Check quote validity and program conditions rather than treating a year label as a price guarantee.
- Set monthly trading days and block lengths, then enter machine groups, counts and downtime.
Use names that identify capacity and independent operation.
- Define whole-number wash, linked-dry and extra-dry bundles and assign their blocks and equipment.
Enter prices, run and cleanup time, consumption and supplies.
- Separate opening cash, monthly costs, owner work and principal cash, confirm the verified inputs, and calculate.
Do not substitute zero for unknown values.
- Review current operations, all three required volumes and peak shortages, then duplicate a plan to compare revised conditions.
Recalculate after editing so the result matches the latest inputs.
Use cases before committing to a site
Compare a dryer expansion quote
Keep washer assumptions fixed and change dryer equipment and installation costs in another plan.
Lower shortages may come with higher lease, electrical work and maintenance costs, so update the actual quote as well as the machine count.
Test evening and weekend concentration
Compare a peak mix based on observed records rather than spreading monthly volume evenly across all opening hours.
A two-block average does not prove feasibility on the busiest day; check concentrated weekends against actual operating records.
Unattended premises still incur cleaning, supplies, security, connectivity, customer response and owner time.
A breakdown affects both unavailable machine time and repair costs through different inputs.
A lower opening equipment quote does not automatically imply lower recurring cost; match program conditions and included installation work before comparing alternatives.
Frequently asked questions
Does this provide average laundromat startup costs?
No market average or brand profit is supplied.
Enter actual rental, equipment and installation quotes to separate opening cash from monthly costs and find the washing and drying volume needed to cover them.
Example amounts are fictional calculation inputs.
Can wash and dry cycles be added to count customers?
They count paid operations, not unique customers.
The same person may wash and then dry, or use several machines on one visit.
Revenue is counted for each paid operation, but the combined cycle count is not a customer-demand forecast.
How do linked and additional drying cycles work?
If eight of ten washes lead to drying and there are two additional paid drying cycles, enter 10 washes, 8 linked dries and 2 extra dries.
The linked rate is 80% and extra drying is 0.2 cycles per wash.
Total drying is 10 cycles, using a consistent paid-program unit.
Do necessary conditions not violated mean I should sign?
The entered resource and time checks found no violation.
The calculation does not establish a feasible minute-by-minute schedule, wash-before-dry sequence, customer waiting time, shared utility capacity or weekend demand.
Confirm the actual premises and equipment conditions separately.
Can I enter the heater power rating as consumption?
Rated power in kW differs from energy consumed per cycle in kWh.
Use measured or documented kWh for the selected program and load.
When specification tests differ from actual operating conditions, compare separately documented plans.
What happens with zero or negative contribution?
A fixed mix with nonpositive contribution cannot cover a positive recurring burden by selling more of that mix.
Recheck prices, consumption, contract rates and payment fees.
Zero burden can require zero bundles, while an all-zero mix is reported separately as unconfigured.
Are the deposit and loan principal monthly expenses?
The deposit is included in opening cash and shown separately from other initial spending.
Interest enters monthly costs; principal repayment enters the final cash-budget threshold.
Deposit recovery, resale proceeds, tax, depreciation and investment payback are not calculated.
May I replace an unknown consumption value with zero?
A confirmed zero is different from an unknown value.
Substituting zero for unknown utilities or supplies overstates contribution and reduces required volume.
Check quotes, bills and program documents before confirming the inputs and calculating again.
Sources and update assumptions
Sources were checked on 2026-11-16.
The calculator uses user-confirmed quotes, consumption and contract rates in a pre-tax KRW operating budget.
It uses no statutory tariff or facility-permit determination; these references explain the calculation and equipment conditions rather than current market prices.
Recheck inputs whenever equipment, program, load, supply conditions, rates, opening hours or quotes change.
Confirm that consumption records match the installed model, owner work does not duplicate staff costs, and additional drying uses the correct paid-program unit.
Turn required volume into a revised supplier quote
Enter the actual price list, program records and quote to identify wash-to-dry constraints.
Use the affected group, trading block and cost-covering quantity to ask specific questions before ordering equipment.
For a revenue-led view of business economics, compare the startup profitability simulator.
For the basic single-product formula, use the break-even point calculator.