Screen Golf Room Turnover & Cash Coverage Calculator

Check pre-tax opening quotes, per-person or per-room billing, game fees and minimum royalties against indivisible room sessions and peak capacity. Compare up to three operating plans for one site.

Replace illustrative values with actual quotes, prices and operating times.

Compare 1–3 plans for one site on the same pre-tax KRW basis. Participant visits, room sessions and billed games are different units. Passing capacity checks does not guarantee a booking schedule, demand, revenue or profit.

Site trading days and daily blocks

Split each day into non-overlapping off-peak and peak blocks totaling at most 1,440 minutes. Sessions crossing a block boundary are not modelled. Enter room-specific closures within each plan.

Plan 1 · Illustrative plan A
Independent room groups and closures

Each group contains independent rooms with equal daily availability. Closure minutes apply to each room per day. Split rooms into separate groups when their available minutes differ.

Room group 1

Sessions, prices, game fees and fixed mix

One session is one team visit occupying one room continuously. Use separate rows for different prices, blocks or groups. Cash-cover quantities retain the integer ratio of monthly session counts. Enter billed game units from the actual contract.

Session row 1

Session row 2

Team and room prices are not multiplied by people again. Billed game units are not inferred from people or team counts. For practice products, enter practice minutes and their verified billing units in the same row.

Opening quotes (pre-tax KRW)

Separate upfront payments from monthly lease charges. Deposits, equipment purchases and loan principal are not automatically allocated to monthly costs.

Monthly fixed costs, owner labour and principal

Enter verified total staff costs including employment-related charges. Avoid duplicating owner labour in staff costs or per-game charges in monthly fixed costs.

Payment fees and ongoing royalty contract

Verify per-game system fees separately from royalties. Cash-cover quantities differ depending on whether the monthly minimum replaces the percentage charge or is added as a fixed fee.

Do not replace unknown inputs with zero. Calculation is withheld until you confirm the inputs. When checking the example, first review what its illustrative assumptions mean.

Enter and confirm the inputs, then press calculate. Recalculate whenever inputs change.

Related calculators

Screen golf opening costs: start with the sessions you need

This calculator helps a prospective operator turn actual rent, equipment and fit-out quotes into the monthly room sessions needed to cover costs.
It is useful when committing savings to a store because per-game system charges, room turnaround, owner labour and peak room capacity can be overlooked in a monthly revenue estimate.

The model preserves your chosen product and time-block mix, finds whole mixed bundles that cover each cost target, and checks the room minutes and indivisible sessions they require.
Sample inputs are synthetic assumptions that explain the model, not a brand quotation, market average, customer-demand forecast or expected return.
This is a pre-tax KRW quote-based budget with a 2026 reference context; it does not calculate Korean taxes or determine permission to operate.

What to do with the result

Take the required peak sessions, room-minute shortage and contractual billable-game units to your equipment supplier or franchisor.
Use them to request a revised room layout, tariff or fee quotation under the same operating assumptions.

Separate players, teams, rooms and billable games

Room sessions and player visits

A session is one continuous visit occupying one room.
Four people playing together create one session and four player visits.
Returning players are counted again, so total player visits are not unique customers.

Contractual billable-game units

Enter the number of units charged per session according to the supplier contract.
One room session may generate several units, while a practice product may have zero game-charge units if confirmed by the contract.
The calculator does not infer chargeable games from headcount, holes or team count.

Per-person billing multiplies the tariff by the number of players; team and room billing charge the entered tariff once.
With a synthetic tariff of KRW 20,000 and four players, a per-person session produces KRW 80,000, while team or room billing produces KRW 20,000.
Check whether the published price already covers the whole team before multiplying it by headcount.

Define room groups and peak versus off-peak blocks

  • Operating days and blocks: enter 1–31 operating days and daily off-peak and peak minutes totalling no more than 1,440 minutes.
    This is an average-day monthly plan; substantially different weekday and weekend patterns need separate scrutiny.
  • Room groups: group independent rooms with the same equipment assumptions and available minutes.
    Split rooms with different maintenance or closure periods into separate groups and enter downtime per room in each block.
  • Session rows: assign each product to one room group and one block.
    Use separate rows when the same product has a different peak price or duration.
  • Expected monthly sessions: these quantities describe the current plan and define the fixed mix maintained in the cost-cover calculation.
    Set a row to zero when it is not part of the sales mix.

Room occupancy is play time plus practice time plus cleanup and turnaround.
Omitting checkout, cleaning or preparation overstates how many teams fit within the opening period.
Keep block downtime separate from per-session turnaround to avoid deducting the same interruption twice.

Distinguish opening cash from recurring monthly costs

Actual opening quotations

Keep the refundable deposit separate from equipment, fit-out, one-off franchise and other opening costs.
All contribute to opening cash, but the deposit is not automatically treated as non-refundable expenditure or a monthly operating expense.
If both equipment purchase and monthly lease costs are entered, confirm that they are separate contractual payments.

Recurring monthly commitments

Fixed operating costs include rent and management, total staff cost, equipment leases, maintenance, utilities, other charges and loan interest.
Enter the employment total you have confirmed; statutory employment charges are not inferred.
Owner labour value and principal repayment are deducted at separate stages.

Avoid counting the same owner labour in both staff cost and owner time value.
Principal repayment is shown separately because it is a cash commitment with a different role from operating cost.
Use the same pre-tax KRW basis throughout; VAT, income tax, depreciation, accounting profit and investment payback are outside this model.

Include per-game charges and monthly minimums

Revenue and variable cost per session

Session revenue = tariff × player count for per-person billing, otherwise 1
Session variable cost = billable-game units × system/content fee per unit + other session consumables
Room occupancy = play minutes + practice minutes + cleanup minutes

Payment fees are revenue multiplied by the payment-fee percentage.
Continuing franchise charges follow the selected contract mode, independently of the game charges already entered in session variable costs.
Check invoices and contractual billing units so that the same charge is not counted again as maintenance or another monthly fee.

Minimum replacement: floor

The continuing charge is the larger of revenue-based royalty and monthly minimum.
These two amounts are not added.
The minimum applies at low revenue until the revenue-based amount becomes larger.

Fixed fee plus royalty: additive

The continuing charge is the fixed monthly fee plus the revenue-based royalty.
The fixed amount remains payable as revenue increases.
The same quoted monthly amount can therefore lead to a different required session count depending on its contractual meaning.

Three cost-cover targets with a whole-number product mix

  1. Operating costs: revenue minus session variable costs, payment fees, continuing franchise charges and fixed operating costs must be at least zero.
  2. Including owner labour: deduct monthly owner hours multiplied by hourly value from operating cash.
    Compare this target with the result that leaves owner work uncompensated.
  3. Including principal cash: deduct monthly loan principal from owner-adjusted cash to find the final budget target.

The greatest common divisor of positive monthly session quantities defines the smallest whole-number mix bundle.
A 2:1 mix means two sessions of the first product and one of the second, so total sessions increase in steps of three.
The model maintains the entered time-block and room-group mix instead of rounding one average-price total and redistributing it arbitrarily.

For each target, the calculation finds the smallest whole bundle count that produces non-negative cash after minimum charges are applied.
An empty mix or insufficient contribution does not produce an invented finite threshold.
A zero-session target is possible when there is no burden to cover.
Amounts are not arbitrarily rounded to whole won between steps: a synthetic KRW 1 tariff,90% payment fee and KRW 1 fixed cost requires 10 sessions.

Worked examples with the same cost assumptions

These are arithmetic checks, not actual store quotations.
Assume a single product billed at KRW 10,000 per room session, a KRW 1,000 system charge per session,0% payment fees and KRW 90,000 monthly fixed operating costs.
First use no continuing franchise charge and then add owner labour and principal cash in sequence.

Synthetic monthly cost conditions, minimum sessions and cash remaining at the stated target
Synthetic conditionAdditional burdenMinimum sessionsTarget cash
Operating costs onlyKRW 010KRW 0
Including KRW 45,000 owner labourKRW 45,00015KRW 0
Owner labour plus KRW 45,000 principalKRW 90,00020KRW 0
Operating +10% royalty / KRW 50,000 floorMinimum KRW 50,00016KRW 4,000
Operating +10% royalty / KRW 50,000 additiveFixed KRW 50,00018KRW 4,000

The last two rows reset owner labour and principal to zero so that only the fee modes are compared at the operating-cost target.
The floor case gives 160,000−16,000−50,000−90,000=4,000; the additive case gives 180,000−18,000−18,000−50,000−90,000=4,000.
One fewer session fails to cover costs in each case.
A financially sufficient count still needs a separate room-capacity check in its assigned time block.

Round down within each room before combining capacity

Total minutes and indivisible sessions are separate tests

Monthly supply = rooms × (block minutes − downtime per room) × operating days
Monthly demand = sum of monthly sessions × occupied minutes per session
Individual-product monthly bound = rooms × floor(daily available minutes per room ÷ occupied session minutes) × operating days

Two rooms with 110 available minutes each can complete only two 60-minute sessions per day: one in each room.
The unused 50 minutes in each room cannot be pooled into a third uninterrupted 60-minute session.
Dividing the combined 220 minutes by 60 and reporting three sessions would overstate saleable capacity.

Rows with the same occupied duration in the same room group and time block are combined for this bound and the additional-room lower bound, even when their tariffs or names differ.
Splitting 60-minute sessions into one visit on one row and two visits on another still gives three visits, exceeding the two-session bound for two 110-minute rooms.

A 120-minute session cannot finish even once in a 110-minute block.
Adding more rooms with the same available duration does not solve that continuous-time shortage; the block or product duration needs review.
Mixed products are checked against both aggregate minutes and individual-product bounds, but the model does not search for an actual room timetable.

What “necessary conditions not violated” means

The entered volume has not exceeded the specific bounds checked; detailed operational feasibility remains unconfirmed.
Mixed 61-minute and 50-minute sessions cannot be declared schedulable from totals and individual bounds alone.
Staff cleanup, shared equipment, booking start times and concentration on the busiest days require separate checks.

Use the calculator from quotation to supplier follow-up

  1. Set operating days and peak/off-peak blocks, confirm downtime and group rooms with identical available minutes.
  2. Use the actual tariff to enter billing basis, players and chargeable-game units for each row.
    Include play, practice and turnaround duration.
  3. Separate deposits and one-off quotes from monthly commitments.
    Confirm whether the continuing fee uses a replacing floor or an additive fixed charge.
  4. Use expected monthly sessions to define the fixed mix.
    Confirm the inputs against your documents, calculate, and compare operating, owner-labour and principal-cash targets.
  5. Check peak/off-peak room-minute shortages and indivisible-session bounds at the target.
    Copy or save the report and request written clarification of the limiting block and contract terms.

Compare up to three operating plans using actual alternative layouts or equipment quotations.
After editing inputs, calculate again because the earlier result may no longer match the current plan.
Leave unknown prices and usage assumptions unconfirmed instead of entering zero to force a result.

Use shortages and sensitivity to review the quote

Adding rooms

The additional-room lower bound considers both total occupied minutes and individual-session limits.
It is not a layout optimisation result and does not confirm sufficient floor space, power or installation approval.
Idle off-peak minutes cannot automatically offset a peak shortage.

Changing available or occupied time

Review one additional independent room in each existing group, 60 additional peak-block minutes, and 10% less play/practice time while keeping cleanup unchanged.
The daily 1,440-minute limit still applies.
These are physical-capacity comparisons with the original quotes and costs held constant; edit and recalculate a plan to include the additional cash needed for expansion or longer opening.
A shorter session is an assumption to verify against actual play and customer experience.

If you change the peak tariff or product mix, recalculate the target from the revised inputs.
The revenue difference at the old required quantity is not the same as a newly calculated minimum session threshold.
Customer acceptance of the price and time block remains outside this model and should be assessed using actual observations and consultations.

Frequently asked questions

Does this give an average screen-golf opening budget?

You enter actual equipment, fit-out and rent quotes.
The calculator does not supply a brand average or target investment return, and conditional public quotations are not applied to every store.

How does per-person billing differ from room billing?

Per-person billing multiplies the tariff by session headcount.
Team and room billing charge the entered amount once, without automatically multiplying it as more players join.
Check whether the tariff already covers the full team.

Why can sessions and billable games have different counts?

A session counts a room visit; a billable-game unit follows the supplier contract.
Several units may arise in one session, and practice products may use a different charging arrangement.
Enter the confirmed unit rather than assuming it matches players or holes.

Is the monthly minimum added to the revenue-based royalty?

It depends on the contract.
Floor mode takes the larger of the two, while additive mode adds the fixed charge to the royalty.
Confirm the clause and an invoice example rather than relying on the word “minimum”.

Should an owner working in the store include labour value?

Enter monthly hours and hourly value when you want to assess compensation for owner work.
The tool shows separate targets before and after that value.
Avoid counting the same labour again if it is already included in total staff cost.

Why is capacity violated when total monthly room time looks sufficient?

Peak and off-peak time are separate resources, and each session must finish continuously in one room.
Two leftover 50-minute fragments cannot accommodate another 60-minute session.
The model therefore checks a per-room floor as well as total minutes.

Does passing the necessary conditions mean I should open the store?

It means only that the entered volume has not exceeded the checked capacity bounds.
An actual timetable, staffing, shared resources, customer demand, location and profits remain unconfirmed.
Permits, facility eligibility and contractual terms need separate review.

What should I check when no required session count is produced?

Check for an all-zero mix or insufficient contribution after variable costs and percentage fees.
Correct missing inputs, invalid blocks or out-of-range values and calculate again.
If additional sales cannot cover the burden, revisit actual tariffs, system charges and fixed-cost quotations.

Primary sources and reference date

Sources were checked on 2026-11-15.
Prices, fees and durations remain user-confirmed pre-tax KRW inputs; public figures are not embedded as industry standards.

  • Golfzon Park official opening-cost guide: its 100-pyeong/five-room conditions and separately quoted works informed the distinction between cost items.
    Confirm whether demolition, fire systems, power upgrades, communications, ventilation, cooling/heating, signage, furniture, fixtures and appliances are included in your own quote.
  • Golfzon Park official opening process: a reference for obtaining disclosure, contract and installation documents.
    The calculator does not determine approval or availability to open.
  • Article 4 of the Korean Enforcement Decree of the Fair Transactions in Franchise Business Act: the official OPEN API confirmed current law ID 009369/MST 288453, Presidential Decree 36561, promulgated and effective 2026-08-04, regarding disclosure-document contents.
    The API marks Annex 1 as effective 2028-01-01, so a frozen earlier download was not reused as a 2026 cost table.
    This reference provides document-checking context; it supplies no statutory rate or cost to the formulas.

Prepare the next decision with a contract checklist

When a quotation or contract changes, recheck billable-game units, minimum-fee mode, room downtime, turnaround, operating days and time-block mix, opening costs and owner labour.
An average-day monthly result does not establish the busiest-day timetable or waiting times; discuss those with the supplier using a detailed operating plan.

For a broader monthly-revenue and longer-term comparison, use the Startup Profitability Simulator alongside this room-capacity check.
For other business models, the Study Cafe Pass and Seat Capacity Calculator and Unattended Cafe Menu and Machine Capacity Calculator model their own products and resource constraints.

Enter your confirmed tariff and contract charges above, save the required teams, player visits, billable games and limiting blocks, and request comparable written quotations.