Compare stenography quotes for the same recording scope
A recording’s full duration may be different from the sections you actually need transcribed.
A low per-minute rate can still produce a higher invoice when each file has a minimum charge or attendance, rush work, and delivery cost extra.
This calculator first defines the required audio segments and deliverables, then applies two providers’ confirmed contract terms to that shared scope.
Use it when arranging a transcript for your family, documenting a conversation connected with a shop or property, or booking a stenographer for a meeting.
Read the selected duration, duplicate selected time, provider totals, and deadline status first.
Then send the segment list and delivery requirements to the providers to confirm the final scope and revision terms.
The examples concern Korea-based contracts, use KRW, and reflect a source review dated 2026-11-19; this is not a statutory fee schedule.
Contract arithmetic, not a market rate or legal assessment
Published providers also use fixed prices for duration bands, so the calculator does not assume that every transcript is priced linearly by the minute.
Use per-minute billing only for a confirmed per-minute agreement.
For a duration-band price or a complex package, enter the provider-confirmed fixed base fee for the selected work.
The result does not assess recording legality, admissibility, notarization, or evidentiary effect.
Prepare file durations, segments, and deliverables
Recording files and selected sections
Enter each file’s duration and every segment’s start and end as minutes:seconds or hours:minutes:seconds.
For example, 04:01 means four minutes and one second, not four minutes and ten seconds.
You can select several segments in one file; keep separate files in separate rows.
The end must be later than the start and cannot exceed the file duration.
Format, copies, and requested turnaround
Choose the requested deliverable—plain text, a signed or stamped transcript, or meeting minutes—and enter the number of copies.
Selecting a format does not establish that a provider can supply it or that it has a particular legal effect.
Express the requested deadline in hours from the same receipt or work-start reference used by each provider’s final turnaround estimate.
The tool accepts up to 10 files and 20 selected segments per file, with each file no longer than 24 hours.
Timecodes use whole seconds.
On-site meeting duration accepts 1–10,080 minutes, requested copies 1–100, and requested turnaround 1–8,760 hours.
These are calculator input limits, not provider booking limits or service standards.
Anonymous file references and timecodes are sufficient for the duration calculation.
Do not enter names or conversation text that the quote arithmetic does not need.
Separately confirm the file-transfer method, access permissions, retention and deletion arrangements, and draft-review process with the provider before commissioning the work.
Merge overlapping selections within each file
Selecting 00:00–12:00 and 10:00–20:00 in one file gives a raw sum of 22 minutes.
The interval from 10:00 to 12:00 appears twice, so the actual selected scope is 00:00–20:00: 20 minutes.
The calculator sorts intervals by start time and merges overlapping or adjacent intervals.
A segment completely contained in another segment is not counted again.
Selected duration and duplicate selected time
Selected duration = sum of the interval-union lengths for each file
Duplicate selected time = raw sum of selected interval lengths − union length
Full recording duration remains separate from selected duration
The same timecodes in two different files count separately.
This tool does not analyze audio or determine whether two files contain the same conversation.
If duplicate recordings exist, decide which file belongs in the commissioned scope yourself.
Interval merging describes the requested work; it does not require every provider to bill that way.
An empty segment, malformed timecode, zero-length interval, or interval outside its file keeps the total pending.
The calculator does not silently discard an invalid row and present the remainder as a complete quote.
Delete a segment row that is no longer needed.
To select a whole file, explicitly use 00:00 and the file’s end time.
Distinguish per-file and project-wide minimums
A per-minute rate, rounding increment, minimum billable duration, and minimum fee are different terms.
The duration minimum creates a floor for billed time; the fee minimum creates a monetary floor for the base service charge.
With per-file billing, apply those rules to each file before adding the charges.
With project-wide billing, combine the selected durations and apply the rules once.
Use the scope confirmed in the actual quote.
Per-minute calculation order
Billed minutes = ceil(max(selected seconds ÷ 60, minimum minutes) ÷ rounding minutes) × rounding minutes
Base service charge = max(round(billed minutes × per-minute rate), minimum fee)
Round the product to whole KRW for each billing scope before comparing it with the minimum fee.
For per-file billing, calculate that charge for each file and add the results
A selection lasting four minutes and one second becomes 10 billed minutes when the minimum is 10 minutes and the rounding increment is five minutes.
The duration minimum is applied before rounding, even when it is not a multiple of the increment.
With a one-minute increment and no duration minimum, 60 seconds bills as one minute and 61 seconds as two.
The increment cannot be zero; a confirmed absence of a duration minimum or fee minimum can be entered as zero.
A minimum fee on each of two files is different from one minimum fee on the combined project.
Do not force segment-specific minimums, different rates by file, or package discounts into a formula that does not match the agreement.
Instead, ask the provider for the base transcription fee covering the same scope and compare it using fixed-fee billing.
Use a confirmed fixed fee for duration bands or packages
If a provider publishes fixed prices for bands such as under three or under five minutes, do not divide a band price into an invented per-minute rate.
Confirm the applicable band for an exact boundary time, multiple short files, or selected sections of a longer file.
The fixed-fee option takes the confirmed base transcription charge for all of the shared selected scope.
Fixed-fee billing does not remove the duration record.
Selected and duplicate durations remain available, but the tool does not reverse-engineer billed minutes from a fixed price.
Changing inactive per-minute minimums or rounding increments does not change the fixed-fee base charge.
The options represent different contract structures for the same requested work.
Avoid adding an included charge twice
If the fixed quote already includes speaker, audio-quality, or rush charges, enter a confirmed zero for those additional items.
If the amount entered already includes tax, do not add the same tax again.
Leave an unknown inclusion unresolved instead of treating it as zero.
Check included time and overtime increments for on-site work
An on-site stenography quote separates meeting duration, base fee, included minutes, overtime increment, and price per overtime increment.
Even a small extension may create another charged increment.
Enter the same required meeting duration for both providers.
Attendance or travel is a separate fee and must use the provider-confirmed amount for the location and travel arrangement.
On-site base service charge
Overtime increments = ceil(max(meeting minutes − included minutes, 0) ÷ minutes per overtime increment)
Base service charge = on-site base fee + overtime increments × price per increment
When the meeting duration equals the included duration, there are no overtime increments.
The overtime increment cannot be zero.
Confirm whether waiting, breaks, preparation, and travel count toward the meeting duration.
If staffing or multiple dates create separate charges, obtain a quote for the same scope and organize those costs explicitly.
Recording transcription and on-site work are alternative modes, not automatically combined services.
For a package that includes later production from a separate recording, establish what the on-site fee already covers.
Switching modes does not make another production service free or commission both services at once.
Add premiums, extra copies, rush work, and quoted tax
Audio-quality and speaker premiums
The confirmed audio-quality and speaker percentages are added together, applied to the base service charge, and rounded to the nearest whole won.
The percentages do not compound.
If premiums apply only to selected sections or use another order, obtain a provider-confirmed final base fee and use fixed-fee billing.
Copies and format charges
Extra copies equal the greater of requested copies minus included copies, or zero.
Multiply that count by the price per extra copy and add any separate format charge.
Check whether electronic files and printed copies have different counting rules and whether signing or stamping is already included.
Premium = round(base service charge × (audio-quality % + speaker %) ÷ 100)
Extra-copy charge = max(requested copies − included copies, 0) × extra-copy price
Total quote = base service charge + premium + extra-copy charge + format + rush + travel + delivery + separately quoted tax amount
A rush fee does not establish that the provider can meet your deadline.
Confirm availability and the final completion time separately.
For delivery, distinguish an electronic handover from postal dispatch or final arrival.
The calculator does not compute postal transit dates or business-day calendars.
The tax field takes a monetary amount shown separately on the quote, not a tax rate.
Enter a confirmed zero if tax is already included, or leave the field unresolved if the provider has not confirmed it.
No statutory Korean VAT rate, taxability, deductibility, or tax-invoice requirement is determined here.
Monetary inputs use whole KRW from 0 to 100,000,000 per item; premium percentages accept 0–1,000% as tool limits, not customary commercial rates.
Separate the entered subtotal, complete quote, and deadline status
An unknown field and a confirmed zero are different states.
Zero means the charge is absent or already included under confirmed terms.
When only some items are known, the tool shows the calculable entered subtotal and remaining questions without treating that subtotal as a complete total.
A price comparison remains pending until the common scope and each provider’s terms are confirmed.
Use the same starting point for requested and quoted turnaround hours.
Do not compare a draft-delivery estimate with a final-delivery deadline, or postal dispatch with arrival.
Check weekend and public-holiday exclusions, when work starts after audio review, and whether revisions are included.
Reconcile any different time-zone reference before entering the durations.
A lower price can still miss the requested deadline
A provider with a complete total but a longer turnaround than requested is excluded from the deadline-compliant comparison.
When both quotes are complete and both meet the deadline, compare the lower total and difference.
If prices tie, read them as equal and review revisions, security, and the final deliverable before deciding.
Work through the comparison in five steps
- Define the shared scope: Choose recording or on-site work and enter file durations and segments or meeting minutes.
Check selected and duplicate time before entering prices.
- Align delivery conditions: Set the format, copies, and requested turnaround.
Give both providers the same segment list and match inclusions.
- Enter provider A: Use the confirmed per-minute, fixed-fee, or on-site structure.
Confirm extras, separately quoted tax, and final turnaround.
- Enter provider B: Keep the common scope and edit only the second contract.
Switch back to review the first provider without discarding its inputs.
- Check and confirm: Read complete totals and deadline status, then save the TXT comparison.
Use the recorded conditions and checklist to confirm the actual order, revisions, and file-security arrangements.
The load-example action uses fictional terms to demonstrate the workflow.
If you open it while editing, close the example to restore your original inputs and editing step.
Replace example prices with figures from your own quote before relying on the result.
The saved TXT records calculation conditions; it is not a provider-issued quote or a contract.
Recording example: 24 minutes 1 second and two complete quotes
All prices below are fictional contract inputs used to demonstrate the arithmetic.
File 1 lasts 30:00, with 00:00–12:00 and 10:00–20:00 selected.
File 2 lasts 10:00, with 00:00–04:01 selected.
File 1’s union is 20 minutes and file 2 contributes 241 seconds, giving 1,441 selected seconds, or 24 minutes 1 second.
Duplicate selected time is 120 seconds, or two minutes.
A: per-file per-minute agreement
Assume a 10-minute minimum, five-minute increment, KRW 2,000 per minute, and no minimum fee.
Billed duration is 20 + 10 = 30 minutes, giving a KRW 60,000 base.
A 10% speaker premium and 0% audio premium add KRW 6,000.
Add KRW 10,000 rush, KRW 4,000 delivery, and one KRW 1,500 extra copy because two copies are requested and one is included.
With zero travel and format charges, the entered subtotal before separate tax is KRW 81,500.
Directly entering a separately quoted tax amount of KRW 8,150 gives KRW 89,650 in total.
Confirmed turnaround is 24 hours.
B: fixed fee for the same scope
Assume a KRW 75,000 base fee for the same segments and deliverable, including two copies.
Premiums, rush, travel, delivery, and format extras are all confirmed as zero.
Add the directly entered separately quoted tax amount of KRW 7,500 to obtain KRW 82,500.
Confirmed turnaround is 36 hours.
Do not infer a per-minute rate or billed duration from this fixed fee.
Fictional same-scope transcription quote and 48-hour deadline comparison| Comparison | Provider A | Provider B |
|---|
| Total quote | KRW 89,650 | KRW 82,500 |
| Confirmed turnaround | 24 hours | 36 hours |
| Within requested 48 hours | Yes | Yes |
With both contracts confirmed for the same scope, B costs KRW 7,150 less.
If B’s turnaround changes to 72 hours, it exceeds the requested 48 hours and cannot be chosen as a deadline-compliant offer just because it is cheaper.
The KRW 8,150 and KRW 7,500 tax figures are assumed provider-confirmed monetary amounts, not results of an automatically applied statutory rate.
On-site example and practical checks
95-minute meeting, 60 minutes included, 10-minute overtime units
Assume a fictional KRW 100,000 base fee including 60 minutes and KRW 10,000 for each additional 10-minute increment.
A 95-minute meeting leaves 35 extra minutes, rounded up to four increments.
The base service charge is KRW 140,000.
Add KRW 20,000 travel, with every other extra and separate tax amount confirmed as zero, to reach KRW 160,000.
These figures do not quote a real provider’s base price or travel rate.
- Several short files: Per-file minimums can differ substantially from project-wide billing.
Confirm whether files are grouped before comparing totals.
- Only part of a conversation: Check whether contextual listening outside selected segments is required.
A shorter selected duration does not imply a proportional reduction in the base fee.
- Urgent delivery: Distinguish draft review, revisions, final production, and delivery completion.
Compare the extra charge and turnaround together.
- Changed on-site plans: Confirm extensions, waiting, location changes, and cancellation terms separately.
This calculator does not determine cancellation charges or refunds.
Frequently asked questions
Can I enter only the sections I need?
Enter the start and end of the required sections for each file.
Overlaps in one file are merged, but confirm whether the provider accepts partial transcription and how listening time and minimum fees apply.
Can I divide a published band price into a per-minute rate?
That can lose the minimum-fee or exact-boundary conditions of a duration-band table.
Use per-minute billing only for a confirmed per-minute agreement; otherwise obtain a confirmed fixed base fee for the same selected work.
Are duplicate conversations across files removed?
Audio content in different files is not compared.
Merging applies only to selected time intervals within one file; decide which duplicated recordings belong in the order yourself.
Should I leave a field blank when there is no extra charge?
A blank field remains unresolved.
Enter zero only after confirming that the charge is absent or included, and do not treat a partially entered subtotal as the final total.
Is VAT calculated automatically?
No tax rate is applied automatically.
Enter the separately stated monetary tax amount from the quote, or confirm zero separate tax when already included.
The tool does not assess taxability or deductibility.
Does paying a rush fee establish that the deadline is met?
Rush price and completion time are separate inputs.
A confirmed turnaround beyond the requested hours is excluded from the deadline-compliant comparison; align business-day, revision, and delivery assumptions first.
Can recording and on-site work be added together?
The modes represent alternative quotes and are not automatically added together.
For a package including later recording production, confirm the inclusions and organize the separate charges before comparing.
Does a TXT comparison or signed-format selection establish admissibility?
The TXT is a record of inputs and arithmetic, not a contract.
Selecting a deliverable or calculating its price does not establish recording legality, notarization, admissibility, or evidentiary effect.
Check the receiving body’s requirements and obtain appropriate professional guidance for those questions.
Sources and contract terms to recheck
Provider-published material was checked on 2026-11-19.
It supports partial transcription, duration-band fixed pricing, possible variation for audio quality, speaker count and rush work, and notices that VAT is separate.
Jeonjin’s notice of 60-minute on-site base time and 10-minute increments beyond the planned time informs the model’s structure; those are not universal terms applied to every quote.
Some published unit labels and segment examples are inconsistent, so those prices have not been copied into default inputs.
Speed’s detailed on-site page could not be read because access was restricted.
No universal per-file or project-wide minimum, overlap policy, copy price, or format fee was established; use actual confirmed contract terms.
Recheck terms before each order and review published information quarterly.
Align the segment list and quote before commissioning
List the required files and sections, then ask both providers to quote the same format, copies, and deadline.
After checking the total, confirm audio quality, speaker identification, draft revisions, security, and deletion arrangements.
Keep the conditions in the TXT comparison and recalculate if the actual order or delivery terms change.
For work priced by source words or characters, language count, and DTP, use the Translation Project Estimate Calculator separately.
Do not substitute translation volume for audio segments or on-site stenography time.