Compare answering-service quotes against the same call ledger
This telephone answering calculator applies two sets of contract terms to one billing-period call ledger.
It shows how per-call rounding, included usage, unfinished or missed calls, after-hours charges, monthly minimums, and setup fees affect the amount payable.
A lower advertised per-call rate does not necessarily produce a lower invoice for your actual mix of calls.
The intended decision is whether a written answering-service quote matches the service you need and the records you already have.
The calculator does not choose staffing levels or compare complete in-house and outsourced operations.
All example prices are fictional arithmetic inputs, not current vendor prices or a survey of Korean market rates.
Enter confirmed amounts from your own quote before treating a result as an invoice comparison.
The result helps you check
- Billing-period cost and the difference between two confirmed contracts
- Chargeable units, included allowance, and overage after rounding each call
- Cost per completed response, including costs of unsuccessful contacts
- Unresolved billing policies and the questions to send to each provider
Match period, currency, time zone, and service scope
Use the same billing period, currency, and required work for both plans.
A quote covering only business-hour appointment requests is not equivalent to one covering overnight escalation and urgent transfers.
Record the quote-check date and time zone so you can revisit the after-hours classification and the validity of the terms.
The billing-month label identifies the records; it does not activate daily proration, cancellation settlement, or a calendar-based night-rate rule.
Choose one currency, KRW or USD, for every amount in the comparison.
The tool does not convert exchange rates or reconcile a dollar quote with a won quote.
Run each billing period separately because combining several months and subtracting the included allowance once changes the billing logic.
A recurring-month result uses the same call mix without setup fees; it is not a forecast of next month’s demand.
Build an anonymous ledger with real call durations
Duration and identical-call quantity
Enter talk seconds and wrap-up seconds separately.
Wrap-up means post-call work such as recording a message or completing the contact record.
Use a quantity greater than one only when duration, wrap-up, status, and after-hours classification are identical for every call in the row.
A row is not an average-duration estimate.
Outcome and after-hours flag
Distinguish completed work, answered but unfinished work, and a missed call.
The after-hours flag is a classification you supply under the contract’s time-zone rules.
The calculator does not infer nights, weekends, or public holidays from a timestamp.
Use individual anonymous records or an identical-duration grouped report from the provider.
Average talk time multiplied by call count cannot recover per-call rounding.
No customer name, telephone number, address, conversation transcript, or recording is needed for this calculation.
Split a group if only some calls have a different outcome, wrap-up duration, night classification, or exemption.
The ledger accepts up to 200 rows, with an integer quantity from 1 to 100,000 per row.
Talk and wrap-up durations each accept whole seconds from 0 to 86,400.
An empty ledger can still produce fixed monthly charges.
If no response was completed, cost per completed response is unavailable rather than zero.
Keep included usage and overage prices in the same unit
A per-call plan counts each chargeable call as one billing unit.
A time-based plan applies a minimum duration to each call and rounds that duration up to the chosen number of seconds per billing unit.
The included allowance and the overage rate must use that same unit.
Do not compare the numerical size of an included-call allowance directly with an included-minute allowance.
Allowance conversion examples
- With a 60-second billing unit, 100 included units means 100 minutes
- With a 30-second billing unit, 100 included units means 50 minutes
- To represent 100 included minutes at 30 seconds per unit, enter 200 units
- Convert the overage price to a price per 30-second unit when using that unit
The minimum seconds per call and the minimum monthly charge are different limits.
The first creates a duration floor for an individual contact; the second creates a money floor for the monthly usage subtotal.
A zero-second record can consume minimum-duration units when the contract says it should.
With no minimum duration, zero seconds consumes no time units, so verify that this represents the actual missed-call billing rule.
Round each call before adding the units
Time-based billing formulas
Billable seconds = max(talk seconds + included wrap-up seconds, minimum seconds)
Row units = ceil(billable seconds ÷ seconds per unit) × identical-call quantity
Overage units = max(0, total billable units − included units)
Overage charge = overage units × price per unit
At a 60-second unit, a call lasting exactly 60 seconds consumes one unit, while 61 seconds consumes two.
With a 120-second per-call minimum, a one-second call consumes two units.
A 60-second call plus one second of included wrap-up also consumes two units.
The same record consumes one unit under a plan that excludes wrap-up, so check that switch separately for each quote.
Two calls lasting 61 seconds each consume 2 + 2 = 4 units.
Adding their durations first gives 122 seconds and then three rounded units, which is not the per-call billing result.
Entering an identical-call quantity of two preserves the four-unit result.
This distinction can materially change overage for a business receiving many short contacts.
Resolve missed calls, unfinished work, and exemptions by plan
A missed call is not automatically free, and an answered call is not necessarily completed work.
Completed calls are billable by default in this model.
For answered but unfinished calls and missed calls, choose charged, free, or unresolved separately in each contract.
Ask the provider how it treats abandoned contacts, failed bookings, wrong numbers, spam, callbacks, and repeated attempts.
A plan-specific row exemption takes priority
Mark an exemption only when the provider has confirmed that the row is free under that plan.
Keep the record in the shared ledger because the same call may be billable under the other quote.
An exempt row consumes neither billing units nor charged after-hours calls, but a completed exempt call still counts as completed work.
If only part of a grouped row is exempt, split it before calculating.
The calculator does not allocate a limited number of free short calls in chronological order.
It does not identify spam or decide which side of an ambiguous duration boundary a record falls on.
Confirm the allowance, order, and qualifying criteria with the provider, then mark the relevant rows.
Leave a genuinely unknown policy unresolved instead of entering zero as a substitute for missing information.
Apply the monthly floor before adding setup fees
Enter the monthly base fee and recurring option fees separately.
In this model, the after-hours surcharge is a fixed amount for every chargeable after-hours call, including calls within the included allowance.
It is not a percentage premium and is not limited to overage.
A contract with either of those structures needs a separate vendor calculation rather than the same inputs forced into this formula.
Monthly cost and directly entered tax uplift
After-hours charge = charged after-hours calls × fixed surcharge per call
Monthly usage = max(monthly minimum, base + overage + after-hours + monthly options)
Period amount before tax = monthly usage + setup fee due in this period
Tax uplift = period amount before tax × entered percentage ÷ 100
The setup fee sits outside the monthly minimum and is added once when due.
The first-period scenario includes it once; the recurring-period scenario excludes it.
The selected current-period total follows the setup-fee switch.
Use these views to avoid spreading an initial fee into every monthly invoice or allowing that fee to incorrectly satisfy the monthly minimum.
Enter only a tax uplift confirmed for the quote.
No statutory Korean VAT rate is built into this calculator, and it does not determine taxability, deductibility, or jurisdiction.
Amounts use two decimal places and the tax uplift is rounded to two decimals.
Do not add tax again to a quote that already includes it.
Multiple tax rates and provider-specific truncation rules are outside this model.
Worked example: 85, 165, and 230 seconds
Take three completed calls lasting 85, 165, and 230 seconds with no included wrap-up.
Assume a 60-second unit, no per-call minimum, five included units, a KRW 1,000 overage rate, and a KRW 10,000 base fee.
Assume no after-hours or option charges, no additional monthly floor, and a directly entered tax uplift of 0%.
These are fictional calculation inputs, not a vendor offer.
Per-call rounding and fictional answering-service invoice example| Item | Calculated value |
|---|
| Units for 85 / 165 / 230 seconds | 2 / 3 / 4 |
| Total / included / overage units | 9 / 5 / 4 |
| Overage charge | KRW 4,000 |
| Recurring-period total | KRW 14,000 |
| First period with KRW 2,000 setup fee | KRW 16,000 |
| First-period cost per completed response | KRW 5,333.33 |
For a separate minimum-charge example, enter base 10, monthly minimum 100, setup 20, and a directly entered tax uplift of 10%.
The recurring result is 100 + 10 = 110.
The first-period result is (100 + 20) + 12 = 132 because setup is added after the monthly floor.
This example uses fictional amounts in one consistent currency and makes no claim about any country’s tax rate.
A known subtotal is different from a confirmed zero
If a missed or unfinished call has an unresolved billing policy, the known subtotal leaves that record out and the final total remains unavailable.
The same final-total restriction applies when the overall billing terms and equivalent service scope have not been confirmed.
A fictional example can therefore show arithmetic without becoming a confirmed invoice.
Zero means you have confirmed that a cost is absent; it does not mean the amount is unknown.
Both plan totals must be confirmed before the calculator reports a price difference or a lower-cost choice.
A confirmed quote does not automatically win against an unresolved quote.
Equal totals are a tie.
Use a known subtotal to locate missing terms, not as a final payment instruction.
A lower price also says nothing by itself about response quality, availability, or suitability.
Cost per completed response divides the confirmed total by all completed calls, including completed calls that were exempt from billing.
Fees for missed or unfinished contacts remain in the total when those contacts are chargeable.
That makes the metric useful when a low contact price produces few completed tasks.
With zero completed calls, the metric is unavailable rather than a zero-cost result.
Step-by-step quote and invoice reconciliation
- Collect anonymous call records for one billing period and separate talk, wrap-up, outcome, and after-hours classification
- Match currency and required work, then record the time zone and quote-check date
- Check the unit and per-call minimum, converting included usage and overage rates to that same unit
- Enter base, monthly options, the fixed after-hours charge, monthly minimum, setup, and confirmed tax uplift
- Resolve missed and unfinished call policies and mark each plan’s confirmed row exemptions
- Compare row-level units, overage, known subtotal, final total, and cost per completed response
- Ask the provider about unresolved terms, calculate again, and save the comparison with its assumptions
Recalculate after changing the ledger or a contract input; an earlier result no longer represents the edited quote.
Check setup fees in the initial period and allowance or option changes at renewal.
A provider may collect overage before the end of the billing cycle, so several payment dates do not necessarily represent several months of usage.
Request a period-based itemized statement when reconciling the result with card or bank records.
Three practical operating scenarios
A shop with many short enquiries
Per-call rounding can increase billed time even when total talk time is modest.
Compare the actual short-call ledger under a per-call quote and a time quote.
Apply short-call exemptions only to records that qualify under the confirmed allowance.
A service with unsuccessful bookings
Define whether a completed response means a successful booking, a delivered message, or another agreed outcome.
Chargeable unfinished contacts increase cost per completed response.
Check callback responsibilities and the definition of completion alongside the invoice amount.
An operation requiring night escalation and onboarding
Confirm whether the night charge applies to every charged contact or only to a specific transfer option.
Check whether setup is charged once, per location, or per telephone number.
Enter only the combined setup amount actually due in the selected period and keep it separate from recurring costs.
Contract checklist and model limits
- Where billable time starts and ends, and whether wrap-up or queue time is included
- Billing and exemption limits for missed, unfinished, spam, wrong-number, and repeat calls
- Whether the allowance and overage rate are per call, per minute, or per smaller time unit
- Which costs satisfy the monthly minimum and where setup fees enter the invoice
- Night, holiday, booking, messaging, transfer, reporting, and destination options
- Tax-inclusive pricing, cancellation, renewal, unused allowance, and payment timing
The model does not automatically calculate allowance rollover, tiered discounts, percentage night premiums, overage-only premiums, mid-month proration, exchange rates, multiple tax rates, refunds, or damages.
For a more complex contract, ask the supplier to produce an itemized calculation against the same ledger.
The tool does not determine labor obligations, lawful handling of personal data, or whether a professional service is appropriate.
When the invoice uses a different sequence or cost category, resolve the contract rule before changing numbers to make the totals match.
Frequently asked questions
Can an average call duration produce an exact bill?
Not for a contract that rounds each call.
Obtain individual anonymous records or counts grouped by identical duration and status.
How do I enter 100 included minutes with a 30-second unit?
Enter 200 included units.
The overage price must also be the price per 30-second unit.
Are missed calls always free?
No universal rule is assumed.
Select free or a row exemption only after confirmation, and otherwise keep the policy unresolved.
Does the calculator choose which short calls are exempt?
No automatic allowance allocation is performed.
Confirm qualifying records and their order with the provider, then mark exemptions separately for each plan.
Does the night charge apply within the included allowance?
In this model it applies to every chargeable after-hours call.
A contract charging only overage requires a different calculation.
Is setup included in the monthly minimum?
This model applies the monthly floor first and adds setup outside it once.
Check that sequence against the actual written contract.
Why is cost per completed response missing?
The value is unavailable when there are no completed calls or the total remains unresolved.
It is not represented as zero.
Can I select the smallest known subtotal?
An unresolved quote is not ready for a final price comparison.
Confirm billing terms and equivalent service scope for both plans, then calculate again.
Primary sources and verification date
Source check: November 18, 2026 (2026-11-18).
These international provider pages establish examples of billing structures, not Korean market prices or universal contract terms.
Recheck the actual contract whenever terms change, and revisit public descriptions periodically.
- AnswerConnect: plan minutes describes wrap-up time, queue-time exclusion, per-call rounding, and a short-call exemption.
The exact 30-second boundary and details after the exemption limit are not sufficiently clear to hardcode as automatic rules.
- Smith.ai: receptionists pricing describes included calls, per-call overage, conditional spam exemptions, and options.
Its published no-setup-fee and same-day/night-price conditions are provider-specific rather than defaults for every service.
- Smith.ai: reasonable use policy, with a displayed update of April 1, 2025, illustrates that per-call pricing still has service-scope and exception conditions.
- AnswerConnect: overage collection explains why payment timing may differ from the period in which usage accrued.
Confirm the quote, calculate again, and keep the assumptions
Reconcile the units against your ledger, ask the provider about unresolved terms, and save the confirmed comparison.
Consider service scope, completion criteria, and availability alongside price.
For the broader decision between operating a team and outsourcing it, use the Call Center BPO vs In-House Cost Calculator to include labor, technology, facilities, and management costs.