Office Carpet Cleaning Scope and Downtime Calculator

Compare two quotes for the same carpet area. See cleaning fees, temporary workspace costs and the planned re-entry time.

Shared work scope

Include only the carpeted areas covered by both quotes in the area to clean.

Schedule and alternative workspace

What will a Friday evening carpet clean cost your office?

If a Saturday shift needs the meeting room, find two figures in each written quote first.
One is the amount payable to the cleaner.
The other is the time the room is expected to be available again.
A lower cleaning bill may still require more paid hours in a temporary workspace.

Use this calculator to compare two one-off deep cleans of fitted office carpet.
Enter the area and agreed method once, then record the price, extra work and drying schedule offered by each vendor.
The operating budget adds your team’s actual alternative-work expense to the cleaning quote.
Use the checklist to request missing details before booking.

Measure the carpet the crew will actually clean

Mark the boundary on a floor plan

Your leased floor area can include a tiled entrance or a kitchenette with a different finish.
Enter the full floor area and measure the carpet within the proposed work boundary separately.
Count shared corridors once.
If a vendor measured the area on site, send the same marked drawing and square-metre figure to the other vendor.

Agree on access under furniture

A team might move chairs but leave fixed shelving and server cabinets in place.
Identify the floor that will be exposed, who will move each item and who will put it back.
Removing a furniture surcharge from one quote does not adjust the area that the vendor priced.

Enter positive areas in m² and keep the cleaned area within the total.
If the cleaned area is larger, check for repeated corridors, mixed units or the inclusion of another floor.
Run separate comparisons for zones that close and reopen at different times.
Combining two visits can obscure a separate minimum charge for each visit.

Confirm the carpet construction and cleaning method

Check the product record or installation documents before recording carpet tile, roll or another construction.
A meeting room that looks like the rest of the office may have a replacement product with different care instructions.
Separate the quotes by product or work area when their instructions differ.

Confirm both what the manufacturer permits and what the vendor will do on site.
If the quote lists only carpet cleaning, ask which stain treatment, cleaning, water recovery and drying steps it includes.
A common set of photographs is helpful, but both vendors still need to confirm the same floor boundary, method and access conditions before their budgets can be ranked.

Enter the two written quotes

  1. Record the total and cleaned areas, carpet type, confirmed method and manufacturer-guidance check.
    Enter the start in Korea Standard Time (KST) and the hourly alternative-work cost for the whole team.
  2. For quote A, select a per-square-metre rate or a flat base price.
    Use VAT-inclusive KRW for the quoted minimum and extras.
    Enter zero for the minimum only if the vendor confirms there is none.
  3. Read the lines for stains, furniture, drying equipment and site extras.
    If a charge has a trigger but no agreed maximum, leave it unknown and request a written cap.
  4. Enter cleaning minutes, drying minutes and the minutes within that interval when the business will actually incur alternative-work costs.
    Enter quote B for the same scope, using B’s own duration and prices.
    Read the operating budgets alongside the projected return times.

Reconstruct the vendor’s bill

Apply the base minimum once

For area pricing, multiply the cleaned area by the quoted KRW per m² and round the product once to the nearest won.
Take the greater of that figure and the base minimum.
For a flat price, take the greater of the written flat base and the minimum.
If the contract applies a minimum to the entire invoice or combines it with travel, ask the vendor to break down the base and site charges before using this calculation.

Use the full amount for each extra

If the stain rate is per spot, obtain the agreed spot count or a maximum charge for the area.
If furniture is priced per desk, establish how many desks and whether the price covers putting them back.
Enter each line’s total.
A fan rental or furniture move already included in a flat quote contributes no separate charge.

The confirmed vendor subtotal adds the known base and fixed extras.
A conditional item can contribute anything from zero up to its written cap.
An unanswered question leaves the upper figure open.
Preserve the known subtotal and ask for the missing amount before treating it as the full price.

Read the return time and alternative-work cost separately

The projected re-entry time is the start plus cleaning minutes plus vendor-confirmed drying minutes.
Check the date when a job crosses midnight.
Even seats outside the cleaned area may remain inaccessible if the only route to them runs through a drying corridor.

Multiply the team’s hourly alternative-work cost by the affected minutes, divide by 60 and round to the nearest won.
Use the whole team’s hourly amount once.
If drying continues overnight but the team rents another room for only two hours, enter those two hours.
Enter zero affected minutes when normal operations can continue without extra spending.

An external workspace might have a minimum booking that extends beyond the cleaning and drying window.
Account for that separate agreement in the office budget.
The operating budget here covers the vendor’s quote and the alternative-work expense within the stated interval.
Forecast lost sales separately if your business needs that analysis.
Ask the crew to check the actual condition of the carpet before reopening.

Worked example — two quotes for a Friday evening

These fictional figures illustrate the arithmetic.
The office has 150 m² of floor, including 100 m² of carpet to clean.
Both crews would start on November 20, 2026 at 18:00 KST.
Both vendors confirm the common method and site conditions, and the team’s alternative-work rate is KRW 30,000 per hour.

Quote A · area rate with a base minimum

At KRW 2,000 per m², the area charge is KRW 200,000.
The KRW 220,000 minimum applies.
A fixed KRW 30,000 furniture move makes the confirmed vendor subtotal KRW 250,000.
A conditional stain charge capped at KRW 40,000 brings the maximum to KRW 290,000.
Cleaning takes 120 minutes and drying takes 480 minutes, giving a projected return of 04:00 on November 21.
The team needs 120 minutes of alternative work costing KRW 60,000.
Its operating budget is KRW 310,000–350,000.

Quote B · flat price with the extras included

The quoted flat base is KRW 300,000, the minimum is zero and all extras are included.
Cleaning takes 180 minutes and drying takes 240 minutes, giving a projected return of 01:00 on November 21.
The team needs 60 minutes of alternative work costing KRW 30,000.
Its operating budget is KRW 330,000.

B’s KRW 330,000 falls within A’s range.
A stain charge of KRW 20,000 makes the operating budgets equal.
Above that amount, B costs less.
If A confirms that stain treatment is included, A’s operating budget falls to KRW 310,000.
If the stain cap is still unknown, leave A’s upper bound open and send the vendor the marked photographs and treatment details for a revision.

Questions to settle before placing an order

  • Which stains and areas did the crew assess, and when? Ask for the trigger and the maximum VAT-inclusive charge in the same written reply.
  • Which furniture or powered equipment must move? Allocate responsibility for clearing the area beforehand and returning the furniture after the clean.
  • Who has checked water supply, drainage, equipment access and fan collection? Get the full charge for night access or staged work if applicable.
  • Who will inspect the floor and release each zone if drying takes longer? Allow time between the handover and the next scheduled user.

Frequently asked questions

Does the lowest base price identify the lowest operating budget?

Fixed extras, conditional charges and alternative-work costs can change the outcome.
Once both quotes meet the common conditions, one budget is lower only if its upper limit sits strictly below the other quote’s lower limit.
If the ranges touch or overlap, establish which extra charges will actually apply and review how soon the space can reopen.

Can I enter zero when drying time is missing?

Enter zero if the vendor has confirmed that no additional drying interval is needed.
If you only have a job finish time, ask how long until planned re-entry and who will check the floor.
Review the estimate again if the material, ventilation, humidity or method changes.

What if the team works from a meeting room on another floor?

Identify the real additional cost of the arrangement.
If external desks and internal rooms are used together, enter the total actual hourly cost for the team during the affected period.
If rates or occupancy change substantially by period, reconcile those separate costs in the office budget.

How should I enter a quote marked VAT extra?

Request the gross KRW amounts for the base and extra work from both vendors.
Until the basis is clear, keep the affected charges open and record the question.
The calculator uses the VAT-inclusive figures you supply and applies no automatic tax rate.

Can staff enter as soon as the projected return time arrives?

The projected time uses the vendor’s estimate given before the work.
If the crew finishes late or the ventilation setup changes, have the onsite contact inspect the carpet and update the handover time.
List open and restricted zones separately so that release of one room is not mistaken for reopening the whole office.

Sources and review date

On November 19, 2026, we checked two providers’ service descriptions for carpet construction, measured area, stains, furniture movement, site access and drying conditions.
Use these descriptions to prepare questions.
Confirm the scope, manufacturer guidance, payable prices and projected access time with the vendor for each job.

For recurring janitorial staffing costs, use the Office Cleaning Outsourcing vs Direct Hiring Calculator to compare staffing hours and monthly costs.

Request comparable written revisions

Start with the quote that has unresolved work.
Save the checklist as a TXT file, send the questions alongside the marked floor plan and update the affected lines after the vendor replies.
List the vendor bill, alternative-work expense and projected handover separately in the office schedule so the purchasing and facilities teams each have the figures they need.

Return to the quote form

Related calculators