Custom Packaging Box Dieline, MOQ & Delivery Quote Calculator

Match approved dielines and specifications before comparing MOQ, price tiers and tooling charges.
Review cash outlay in KRW, split deliveries and actual flat-bundle storage, then save a supplier checklist.

Defaults are a fictional example. Replace them with approved specifications and written supplier quotes.

Lengths use mm and prices use KRW. Blank costs are unknown; zero means confirmed free/included. Enter zero for separate plate/finishing charges already included in the unit price. Enter the quoted tax rate and inclusion basis; this tool does not determine tax liability.

1. Shared delivery rounds and storage limit

Each round is the same receipt event across all products. Consumption occurs immediately before that receipt; there is no opening stock at round one. Put the date/order in each label.

0–1,000,000

Reconcile delivery totals after removing a round. Check aisles, pallets and stacking constraints separately.

For tooling, plates, shipping or storage shared across products, enter the charge once or allocate it between products. Repeating it will double-count the charge.

2. Product 1

1–1,000,000

Required specification · dimensions/dieline/material/print

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0–2

0–8

Product consumption before each receipt

0–1,000,000

0–1,000,000

Supplier A
Quoted specification · compare with required spec

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0–2

0–8

1–1,000,000

1–1,000,000

Actual all-units quantity tiers

The highest tier threshold at or below the rounded order sets the price for every piece. Progressive/block pricing is not supported.

1–1,000,000

0–1,000,000 · confirmed included/free = 0

1–1,000,000

0–1,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000 · confirmed included/free = 0

0–1,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0.01–10,000

0.01–10,000

0.01–10,000

Measure the actual flat-packed bundle for the stated piece count, rather than an assembled box. A partial bundle still occupies one full bundle space.

Delivery 1

0–2,000,000

0–1,000,000,000 · confirmed included/free = 0

Delivery 2

0–2,000,000

0–1,000,000,000 · confirmed included/free = 0

Single-delivery alternative for the same order

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–100 · confirmed included/free = 0

Supplier B
Quoted specification · compare with required spec

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0.01–10,000

0–2

0–8

1–1,000,000

1–1,000,000

Actual all-units quantity tiers

The highest tier threshold at or below the rounded order sets the price for every piece. Progressive/block pricing is not supported.

1–1,000,000

0–1,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000 · confirmed included/free = 0

0–1,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0.01–10,000

0.01–10,000

0.01–10,000

Measure the actual flat-packed bundle for the stated piece count, rather than an assembled box. A partial bundle still occupies one full bundle space.

Delivery 1

0–2,000,000

0–1,000,000,000 · confirmed included/free = 0

Delivery 2

0–2,000,000

0–1,000,000,000 · confirmed included/free = 0

Single-delivery alternative for the same order

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–100 · confirmed included/free = 0

Cash, delivery and storage review

Comparison pending: review specification, missing costs, delivery schedule and storage overflow below. A displayed amount does not establish order suitability.

Supplier A

All-product cash total
770,000 KRW
Known cost subtotal · before added VAT / entered basis
700,000 KRW
Surplus order (pieces)
200
Single / split peak volume (m³)
0.48 / 0.288

Peak storage overflow: 0.038 m³

  • Delivery 1: 0.24 m³ / 0.25 m³ · excess 0 m³0.24
  • Delivery 2: 0.288 m³ / 0.25 m³ · excess 0.038 m³0.288

Supplier B

All-product cash total
756,800 KRW
Known cost subtotal · before added VAT / entered basis
688,000 KRW
Surplus order (pieces)
0
Single / split peak volume (m³)
0.384 / 0.192

Within entered storage limit

  • Delivery 1: 0.192 m³ / 0.25 m³ · excess 0 m³0.192
  • Delivery 2: 0.192 m³ / 0.25 m³ · excess 0 m³0.192

Box 1 · required 800 pieces

A · Supplier A

Ordered / surplus (pieces): 1,000 / 200

Applied tier threshold / unit price: 1,000 / 450 KRW

Product cost
450,000 KRW
Die / plate / sample charges
170,000 KRW
Finishing / packing
30,000 KRW
Shipping across rounds
40,000 KRW
Split storage fee
10,000 KRW
Quoted subtotal
700,000 KRW
Added VAT
70,000 KRW
Split cash total
770,000 KRW
Per ordered piece
770 KRW
Per required piece
962.5 KRW
Same-order single-delivery cash
775,500 KRW
Split minus single difference
-5,500 KRW
Box 1 Supplier A delivery, stock and volume ledger
RoundConsumedReceivedStockm³
Delivery 105005000.24
Delivery 24005006000.288

B · Supplier B

Ordered / surplus (pieces): 800 / 0

Applied tier threshold / unit price: 1 / 600 KRW

Product cost
480,000 KRW
Die / plate / sample charges
140,000 KRW
Finishing / packing
24,000 KRW
Shipping across rounds
36,000 KRW
Split storage fee
8,000 KRW
Quoted subtotal
688,000 KRW
Added VAT
68,800 KRW
Split cash total
756,800 KRW
Per ordered piece
946 KRW
Per required piece
946 KRW
Same-order single-delivery cash
763,400 KRW
Split minus single difference
-6,600 KRW
Box 1 Supplier B delivery, stock and volume ledger
RoundConsumedReceivedStockm³
Delivery 104004000.192
Delivery 24004004000.192

Next: save the specification, dieline revision, bundle size, dated delivery quantities and missing-cost list; request revised quotes on identical terms from both suppliers.

Confirm strength, food-contact suitability, actual warehouse layout and lead time with responsible parties. The single-delivery alternative is a cost scenario for the same order; it does not guarantee sufficient storage.

Compare the complete custom box order

A low unit price can hide a larger minimum order, new tooling, printing plates, repeated freight or storage charges.
Custom packaging quotes may also describe different dimensions, materials or print coverage, even when the requested quantity is identical.
This calculator compares two suppliers against the same confirmed specification and consumption plan, using actual quoted amounts rather than a market price list.

Prepare the supplier documents

Have the approved dieline revision, dimension basis, material and flute, print sides and colors, quantity tiers, setup charges, packed bundle dimensions and delivery terms ready.
Record the date each quote was checked and whether charges are included or additional.
Defaults are fictional examples, and all monetary inputs and outputs use KRW.
The model reviewed on 2026-11-16 is purchasing arithmetic; it does not determine a statutory tax rate, packaging compliance or supplier quality.

Match the specification before comparing prices

Internal or external dimensions

Internal dimensions describe the space available for the contents; external dimensions describe the assembled box outside.
The same length, width and height numbers do not make two quotes equivalent if they use different measurement bases.
Match the dimension order and mm units, and use supplier-confirmed allowances in your required specification.

Dieline, material and print scope

The dieline width, height and revision, material/flute description, printed sides and color count must match the requirement.
Text is trimmed and compared exactly; similar material names are not automatically treated as equivalent.
The calculator neither designs a dieline nor converts internal dimensions into external dimensions from board thickness.

A missing confirmation, missing quote-check date or specification mismatch places the quote on hold.
A cheaper quote for a different dieline or print scope is excluded from comparable totals.
If a substitute material is acceptable, confirm equivalence with the supplier, update the common requirement and obtain revised quotes on that basis.

MOQ, pack rounding and whole-order price tiers

Required quantity is the number you intend to use; MOQ is the supplier’s minimum order quantity.
The greater of these values is rounded up to a multiple of the pack size to obtain the actual order.
The difference between ordered and required quantities is the surplus order, whose purchase cost remains part of the cash comparison.

Quantity and price formulas

Order Q = ceil(max(required quantity, MOQ) / pack size) × pack size
Surplus = Q − required quantity
Product charge = Q × the applicable whole-order unit price

Enter each quoted tier as a starting quantity and a unit price.
The model selects the greatest starting quantity no higher than Q and applies that one price to every ordered unit.
This is not progressive or block pricing: quantities in earlier tiers are not charged separately.
A lower price starting at 1,000 units therefore applies to the entire order when rounding reaches 1,000.
If no entered tier covers the order, the unit price remains unconfirmed.

Ask whether the quoted MOQ is tied to the product, production method or print job, and whether a separate short-run option is available.
Increasing volume to unlock a lower tier may still require more cash and storage.
Do not infer the supplier’s quantity tiers from another product or a public example.

Separate setup, per-unit and delivery charges

  • Tooling, plates and samples: enter the actual one-time total charged for this order.
    Check reuse, ownership and storage terms for a future reorder rather than assuming that existing tooling is free to use.
  • Finishing and packing per unit: these are additional amounts multiplied by Q.
    Enter zero when a charge is confirmed as included in the product price, and avoid adding it again.
  • Split-delivery freight and storage: freight is charged for each positive-quantity receipt, plus the total storage fee for the split-delivery arrangement.
    If several SKUs share one freight or sample charge, allocate it once across the items instead of duplicating it.
  • Single-delivery freight and storage: these are separately confirmed charges for receiving the same ordered quantity at once.
    Leave them unknown if that alternative has not been quoted.

An empty amount means unknown; zero means confirmed free or included.
Unknown freight must not be entered as free merely to produce a total.
The result distinguishes confirmed charges from an incomplete final amount, and an unknown single-delivery alternative does not by itself invalidate otherwise complete split-delivery costs.

Use the tax basis stated in the quote

Tax-inclusive mode keeps the quoted subtotal unchanged; tax-extra mode adds tax at the rate you enter.
The combined subtotal is rounded to whole KRW first, then the added tax is rounded to whole KRW.
A supplier’s line-by-line rounding can produce a different invoice amount.
The fictional 10% example is a contract assumption, not an automatic determination of tax liability, the legally applicable rate or an input-tax credit.

Step-by-step workflow

  1. Set up to four SKUs and four common delivery rounds.
    A given round must represent the same point in the plan for all items.
  2. Enter each required specification, required quantity and consumption before each receipt.
    Consumption before the first receipt is zero, and both suppliers use the same consumption plan.
  3. Copy the confirmed specification, check date, MOQ, pack size and price tiers from supplier A and supplier B.
    Resolve specification differences before treating their prices as equivalent.
  4. Enter setup costs, per-unit additions, split and single-delivery charges, and the quoted tax basis.
    Avoid double counting included charges and leave unknown amounts empty.
  5. Enter quantities and freight for each receipt and the actual external dimensions of a flat-packed bundle.
    Receipt quantities must be pack multiples and must sum to the rounded order.
  6. Calculate, review missing items and peak storage, then save the review sheet as TXT or print it.
    Send the same specification and receipt plan to both suppliers when requesting revisions.

Worked example: 800 needed, 1,000 ordered

Assume a fictional requirement of 800 units, MOQ 1,000 and pack size 50.
The actual order is 1,000 units, leaving a 200-unit surplus.
A quoted whole-order price of KRW 500 below 1,000 units and KRW 450 from 1,000 units produces a KRW 450,000 product charge.
These values explain the model and are not current custom box market prices.

Split-delivery cash

  • Product: KRW 450,000
  • Tooling 100,000 + plates 50,000 + sample 20,000 = KRW 170,000
  • Finishing 20 + packing 10 → 1,000 × 30 = KRW 30,000
  • Freight 20,000 × two receipts = KRW 40,000
  • Split storage: KRW 10,000
  • Subtotal 700,000 + assumed extra tax 10% = KRW 770,000

Single delivery and unit measures

For the same product, setup and per-unit charges, single-delivery freight of KRW 25,000 and storage of KRW 30,000 give KRW 775,500 at the same assumed extra-tax rate.
Split minus single-delivery cash is −5,500 KRW, so split delivery costs less in this example.
Split cash per ordered unit is KRW 770; cash per required unit is KRW 962.5.

The effective cost per required unit allocates all order cash, including surplus units and setup, across the quantity actually needed.
The model does not subtract expected resale value or assume that surplus boxes will be used later.
Assess that possibility separately, especially when a design may change before the surplus is consumed.

Use actual packed bundles for storage

An assembled box’s length × width × height is not the storage volume of its flat-packed bundle.
Use supplier-confirmed or measured bundle outside dimensions and the number of boxes in that bundle.
The model conservatively treats a partly consumed bundle as still occupying one full bundle space.

Receipt inventory and occupied volume

Inventory now = prior inventory − consumption before receipt + receipt quantity
Bundle volume (m³) = bundle length × width × height (mm) / 1,000,000,000
Occupied volume = ceil(inventory / pack size) × bundle volume

A 600 × 400 × 100 mm bundle occupies 0.024 m³.
Receive 500 units, consume 400 before the next receipt, then receive another 500: inventory after each receipt is 500 and 600 units.
The corresponding occupied volumes are 0.24 m³ and 0.288 m³.
Against a 0.25 m³ limit, peak excess is 0.038 m³; a single receipt of all 1,000 units would occupy 0.48 m³.

For multiple SKUs, volumes are added within each common round and the largest round total is selected.
Adding each SKU’s separate peak would be misleading if those peaks occur in different rounds.
The reported volume is geometric occupancy only: aisles, pallets, stacking restrictions and handling space are excluded.
Confirm an operational capacity that already allows for the space your warehouse needs.

Interpret holds, shortages and capacity warnings

Comparable total

Both suppliers and every SKU need complete applicable specifications and costs before the full A/B cash comparison is available.
A sum of known lines is not a complete quote when another item remains unknown.
Mismatched specifications are excluded from comparable totals and retained as questions for the supplier.

Consumption before delivery

A plan cannot consume more than the inventory available immediately before a receipt.
A later large delivery cannot retrospectively cover an earlier shortage.
Bring the receipt forward or revise the common consumption plan before comparing the two schedules again.

Cost and storage together

Confirmed cost lines remain useful when capacity is exceeded, but a suitable-order recommendation is held.
Different SKUs are not merged into one average unit price.
Review each item’s effective unit cost alongside supplier total cash and the warehouse occupancy in the same round.

Practical scenarios and limits

For a small product launch, start with the gap between required quantity and MOQ.
A lower nominal unit price can tie up more cash in surplus packaging and expose the business to a later artwork change.
For repeat production, use actual consumption between receipts to evaluate the quoted cash difference and storage difference between single and split delivery.

For reorders, confirm that the old die and plates remain usable with the design and production equipment.
If a truck, sample or other common charge covers several SKUs, enter it once or allocate the amount across them without duplication.
Document ownership of stock held by the supplier, damage and humidity responsibility, the final collection deadline and any extra release charges.

Distinguish a structural sample from a print proof or a pre-production sample that also checks finishing.
The calculator does not assess delivery performance, compression strength, food-contact suitability, color reproduction, defect rates or supplier competence.
A matching specification in this model is not a quality, safety or regulatory approval.

Frequently asked questions

Does entering box dimensions generate a dieline?

No.
Enter the supplier-confirmed dieline dimensions and revision for comparison.
Glue tabs, fold lines, allowances and flute direction are not designed automatically.

What if MOQ is greater than the quantity needed?

The greater value is rounded up to a full pack multiple.
All surplus purchase cash remains in the total and effective cost per required unit.

Are tier prices applied progressively?

No.
One whole-order tier is selected using the rounded order quantity, and its unit price applies to every ordered unit.
Progressive block charging is outside this model.

Can I enter zero for an unknown charge?

Use zero only for a charge confirmed as free or included.
Leave an unconfirmed amount empty so the final total stays on hold and the missing item remains visible.

Does more frequent delivery always reduce storage?

No.
Remaining inventory is added to the next receipt, and a partial bundle still occupies full bundle space in this model.
Check consumption and receipt quantities together.

How do I handle a tax-inclusive quote?

Choose tax-inclusive mode so tax is not added again.
Tax-extra mode uses the rate you confirm; the calculator does not determine statutory liability or deduct an input-tax credit.

Can different material names be treated as equivalent?

Equivalence is not inferred.
Confirm the substitute with the supplier, revise the common required specification and obtain matching revised quotes.

Is the review sheet sufficient to place an order?

Reconfirm price tiers, dieline revision, included scope, delivery dates and storage responsibility with the supplier.
The saved review supports a revised-quote request rather than replacing an approved sample or contract.

Primary sources and update checks

Model reviewed: 2026-11-16.
These manufacturer sources explain measurement and production concepts; their own product terms are not universal Korean prices, MOQ rules or lead times.

Conservative bundle rounding and common-round aggregation are this calculator’s inventory and space assumptions, not an industry-certified loading formula.
Recheck actual quotes, dates, quantity tiers, packed dimensions and included scope for every purchasing decision.

Request revised quotes with one specification and delivery plan

Send both suppliers the same confirmed dieline and common consumption/receipt sequence.
Resolve held questions, surplus units, storage occupancy and the single-versus-split cash difference before choosing an order.

Return to the box quote calculator

Related calculators