CCTV Storage Capacity and Quote Shortfall Cost Calculator

Compare required storage, channels, PoE and licenses with actual quote capacities.
Price only confirmed compatible expansions and save questions for a revised quote.

Use one consistent currency for all costs. For lifecycle costs, use the CCTV purchase versus rental calculator.

Enter retention and usable capacity confirmed for your purpose, policy and equipment settings. Blank means unconfirmed; zero means confirmed as not required or not included.

1. Required capacity

One recording channel is required per camera. Average storage bitrate and simultaneous recording bandwidth are separate requirements. Confirm zero PoE demand where cameras use external power.

Required usable recording storage: Unconfirmed TB

TB means 10¹² bytes. Compare against supplier-confirmed usable TB after formatting and RAID. No automatic retention decision or generic disk conversion factor is applied.

2. Actual quotes and compatible expansion

Use one currency and the same installation scope throughout. Equal lower and upper prices represent a fixed price. Enter a bundled replacement that changes several capacities as a separate quote. Final totals are rounded to two decimal places.

Quote A

Cameras (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Usable recording storage (TB)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Recording channels (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Recording input bandwidth (Mbps)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

PoE ports (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Total PoE power budget (W)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Licenses (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Cable (m)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Quote B

Cameras (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Usable recording storage (TB)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Recording channels (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Recording input bandwidth (Mbps)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

PoE ports (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Total PoE power budget (W)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Licenses (count)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

Cable (m)

Required Unconfirmed · Shortfall Unconfirmed

If short: supported increments, limits and prices

For a fixed price, enter the same amount twice. For free expansion, enter zero twice and confirm compatibility. Maximum total capacity is not the added capacity.

3. Capacity shortfalls and adjusted totals

Cost advantage withheld: check incomplete data, unresolved constraints, ties or overlapping ranges.

Cost advantage requires every alternative to be confirmed and one upper total to be lower than all other lower totals. Results do not certify system design, legal compliance or market-wide lowest prices.

Quote A: A

Confirmed expansions (quote basis before separate VAT)
0
Unresolved capacity rows
8
Adjusted total including VAT
Withheld
Required, included, shortfall, expanded capacities and costs by quote
ResourceRequiredIncludedGapPacksAfterExpansion costStatus
Cameras (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Usable recording storage (TB)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Recording channels (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Recording input bandwidth (Mbps)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
PoE ports (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Total PoE power budget (W)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Licenses (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Cable (m)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed

Questions to confirm with the supplier

  • Confirm base quote price
  • Confirm VAT treatment and any separate rate
  • Confirm system, per-port power, connectivity and license compatibility
  • Confirm matching scope, labor, travel and all other costs
  • Cameras: Confirm required capacity
  • Cameras: Confirm usable included capacity
  • Usable recording storage: Confirm required capacity
  • Usable recording storage: Confirm usable included capacity
  • Recording channels: Confirm required capacity
  • Recording channels: Confirm usable included capacity
  • Recording input bandwidth: Confirm required capacity
  • Recording input bandwidth: Confirm usable included capacity
  • PoE ports: Confirm required capacity
  • PoE ports: Confirm usable included capacity
  • Total PoE power budget: Confirm required capacity
  • Total PoE power budget: Confirm usable included capacity
  • Licenses: Confirm required capacity
  • Licenses: Confirm usable included capacity
  • Cable: Confirm required capacity
  • Cable: Confirm usable included capacity

Quote B: B

Confirmed expansions (quote basis before separate VAT)
0
Unresolved capacity rows
8
Adjusted total including VAT
Withheld
Required, included, shortfall, expanded capacities and costs by quote
ResourceRequiredIncludedGapPacksAfterExpansion costStatus
Cameras (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Usable recording storage (TB)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Recording channels (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Recording input bandwidth (Mbps)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
PoE ports (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Total PoE power budget (W)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Licenses (count)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed
Cable (m)UnconfirmedUnconfirmedUnconfirmedUnconfirmedUnconfirmedWithheldUnconfirmed

Questions to confirm with the supplier

  • Confirm base quote price
  • Confirm VAT treatment and any separate rate
  • Confirm system, per-port power, connectivity and license compatibility
  • Confirm matching scope, labor, travel and all other costs
  • Cameras: Confirm required capacity
  • Cameras: Confirm usable included capacity
  • Usable recording storage: Confirm required capacity
  • Usable recording storage: Confirm usable included capacity
  • Recording channels: Confirm required capacity
  • Recording channels: Confirm usable included capacity
  • Recording input bandwidth: Confirm required capacity
  • Recording input bandwidth: Confirm usable included capacity
  • PoE ports: Confirm required capacity
  • PoE ports: Confirm usable included capacity
  • Total PoE power budget: Confirm required capacity
  • Total PoE power budget: Confirm usable included capacity
  • Licenses: Confirm required capacity
  • Licenses: Confirm usable included capacity
  • Cable: Confirm required capacity
  • Cable: Confirm usable included capacity

Check required CCTV specifications and the cost of resolving shortfalls

The CCTV storage capacity and quote shortfall cost calculator compares two or three actual installation quotes against the same requirements for a home or small business.
A package listing several cameras and a recorder does not establish that the recording space, input channels, power supply and licenses meet your operating plan.
A low initial package price may lead to extra storage, license or wiring costs after installation.

The question to resolve before contracting

Identify what each quote lacks and how much a compatible expansion would cost while meeting the same camera count and recording requirements.
The tool checks the alternatives entered; it does not design a complete installation or certify legal compliance.
For long-term purchase versus rental costs, continue with the business CCTV purchase and rental total cost calculator.

Prepare written quotes and a common installation scope

  • Camera count, average Mbps per camera, recording hours per day, confirmed retention days and storage headroom
  • Required simultaneous recording input bandwidth, the number of PoE connections and total required power
  • Required licenses, total cable length for the same routes and the installation work to be included
  • Each quote’s usable recording TB, recording channels, available ports, total power budget, licenses and cable
  • Written expansion increments, unit-price bounds, final capacity ceilings and compatibility confirmation
  • Whether VAT is included, the confirmed rate when excluded, and confirmation of all other installation costs

Quotes with different camera locations or wiring routes do not represent the same installation.
Describe ceiling work, wall penetrations, work at height, removal of existing cable and network changes where needed, then confirm the common scope and all other charges.
An absent price is not evidence that work is free: carry missing information into the supplier question report.

Calculate required CCTV storage from bitrate and retention

Required TB = cameras × average Mbps × 10⁶ ÷ 8 × recording hours/day × 3,600 × retention days × (1 + headroom % ÷ 100) ÷ 10¹²

The unit is decimal TB, with 1TB equal to 1,000,000,000,000 bytes.
The storage calculation uses six decimal places of TB; a shorter display value must not be re-entered as though it were the full requirement.

Average bitrate describes the data generated over the recording period.
Motion, night noise, codec, resolution and frame settings can change it, so a resolution label alone is insufficient to invent a bitrate.
For scheduled or motion-triggered recording, use recording hours consistent with the operating plan and enter storage headroom agreed for that plan.

Headroom increases required storage; it is not a conversion factor for capacity lost to RAID, formatting or system reservations.
Compare required storage with supplier-confirmed usable recording space in the same TB unit.
If documents mix GiB, TiB and TB, ask the supplier to reconcile those units before comparing the figures.

Each of the eight resources must meet its own requirement

Eight CCTV specifications used to compare requirements with quoted inclusions
ResourceRequired amountQuoted inclusion
CamerasThe number of cameras to installCameras actually included and supported additions
Usable storageDecimal TB from the recording requirementsRecording space after formatting, array configuration and reservations
Recording channelsOne input channel per requested cameraInputs actually available with the quoted configuration
Recording input bandwidthThe confirmed total required MbpsActual input throughput for the disks and recording mode
PoE portsConnections requiring power over EthernetAvailable ports supporting the cameras’ power requirements
PoE powerThe confirmed total required WThe total power budget, separately from per-port compatibility
LicensesThe licenses needed for the installationIncluded licenses and the scope of additional licenses
CableTotal required m for the same installation routesIncluded length and the quoted installation increment

The basic channel requirement assumes one recorder input per requested camera.
Special multi-sensor, multi-stream or separately licensed designs need supplier review rather than an automatic extension of this assumption.
Surplus in one resource cannot compensate for a shortage in another, so review every row.

Separate usable storage, recording channels and input bandwidth

Raw disks versus recording space

The total disk capacity in a product description may describe the raw disk configuration.
Space available for recorded video can differ because of array settings and reserved areas, so obtain usable capacity for the final quoted build.
A capacity reduction seen in one model must not be generalized to another configuration.

Average storage versus input throughput

A recorder with enough channels may still lack bandwidth for simultaneous video inputs.
Enter the confirmed total required recording input Mbps separately from average bitrate used for storage.
Check the throughput supported by the actual disks, recording mode and firmware.

Adding disks does not necessarily increase the recorder’s channel or throughput ceiling.
When a recorder replacement is required, obtain a separate alternative describing the replacement specifications rather than entering it as a simple supported addition to the old device.

Check PoE power, licenses and wiring as separate constraints

Power over Ethernet supplies power through network cabling, but available port count and the total power budget are different limits.
Having ports for eight cameras does not establish that enough power is available under every relevant operating condition.
Explain outdoor equipment, infrared operation and other variable loads to the supplier, and confirm individual port standards as well as the combined budget.

Use the same installation scope for licenses and cable

A recorder with some included licenses may require additional licenses when cameras are added.
The tool does not assume that channel count and included licenses are automatically equal.
Compare the confirmed required and included counts, and check cable additions against the real routes, included lengths and supported installation increments.

A confirmed external power arrangement may mean zero required PoE ports or zero PoE watts.
Enter zero only when it is the confirmed requirement; leave the value unconfirmed if the supply arrangement is unresolved.
Passing numerical resource checks also does not replace confirmation that the complete system is compatible.

Round shortfalls upward to supported expansion increments

Shortfall = max(0, required − included)

Expansion packs = ceil(shortfall ÷ supported increment)

Capacity after expansion = included + packs × increment

A small storage shortage may require a complete 2TB expansion pack when that is the supported increment.
Multiplying the exact shortfall by a price can charge for a fraction of a product that the supplier cannot provide, so the calculation rounds upward in the quoted increment.
Match the price basis to the increment: per camera, port, pack or metre are different units.

The capacity after expansion must stay within the confirmed final ceiling.
For example, a configuration starting at 4TB with only 2TB increments and a 5TB ceiling cannot reach a 5TB requirement by adding one pack, because the resulting 6TB exceeds the ceiling.
A desired capacity is not evidence of a supported expansion increment or maximum.

Confirm compatibility and avoid counting one replacement more than once

Confirming one expansion row is different from confirming that the complete system works together.
Ask whether the cameras, recorder, licenses, disks and power equipment are supported as a combination, including simultaneous expansion of several resources.
A quoted price without support confirmation is insufficient to treat an expansion as resolved.

A bundled replacement is a separate alternative

One recorder replacement can change storage, channels and bandwidth together.
Entering that same replacement charge under all three resources would duplicate the cost.
Add row prices only when the additions are independent, non-overlapping and simultaneously applicable; enter a bundled replacement as another quote with its new included capacities and package price.

When any item remains unresolved, the confirmed expansion subtotal can be reviewed, but the complete expansion cost and corrected total remain withheld.
Distinguish incompatible equipment, an exceeded capacity ceiling and missing information, then use the reported reason to request a revised design or further written confirmation.

Align package prices, price ranges and VAT

Confirmed expansion range = Σ(expansion packs × unit-price lower or upper bound)

Corrected total = (package price + complete expansion cost) × (1 + excluded VAT rate ÷ 100)

Enter the package and additional unit prices on the same VAT basis.
For VAT-inclusive quotes, the tool does not add the included tax again; for VAT-exclusive quotes, it applies the rate you confirmed.
The fictional example rate is not a tax determination for an actual contract.

Use equal lower and upper prices for a fixed confirmed amount, or different bounds for a supplier-confirmed range.
An arbitrary contingency is not a supplier-confirmed price ceiling.
On the English page, enter every amount in the same single currency, with a consistent tax and installation scope; the calculation rounds final amounts to two decimal places.
The Korean page uses whole Korean won.

Worked example: correcting a low package price for missing specifications

Eight cameras at an average 4Mbps, recording 24 hours/day for 14 days with 10% headroom, require 5.322240TB.
Assume confirmed requirements of 8 channels, 64Mbps total input bandwidth, 8 PoE ports, 80W total power, 8 licenses and 160m of cable.
These requirements, retention days, prices and tax rate are fictional teaching values, not legal retention guidance or current market quotations.

Quote A: base KRW 1,000,000

Cameras, channels, bandwidth and PoE meet the requirements, but the quote includes only 4TB usable storage, 4 licenses and 120m of cable.
Add one 2TB pack at KRW 100,000, four individual licenses at KRW 20,000 each and four 10m cable packs at KRW 10,000 each: expansion costs KRW 220,000.
If all additions are compatible, within their ceilings and independently priced, and all other costs are confirmed, a fictional 10% excluded VAT rate produces a corrected total of KRW 1,342,000.

Quote B: VAT-inclusive KRW 1,300,000

Assume all required resources are included and the common work scope and complete system compatibility are confirmed.
No expansion is needed, so the corrected total is KRW 1,300,000.
Although its base package costs more, B is KRW 42,000 lower after meeting the same requirements and is the lower-cost option among these two entered alternatives.

If even one expansion charge in A is unresolved, these final totals and the lower-cost conclusion cannot be finalized.
Replace every example value and confirmation with information from your own written quotes before using the result for a purchase decision.

Read the result matrix and prepare supplier questions

  1. Confirm that retention purpose and recording settings represent the installation you actually need.
  2. Transfer quote inclusions using consistent units, keeping unconfirmed blanks distinct from confirmed zero amounts.
  3. Confirm expansion increments, ceilings, price ranges and compatibility, then review capacity after expansion.
  4. Check other installation costs, tax, full-system compatibility and independent additions before comparing corrected totals.
  5. Save the unresolved items and questions as TXT or print them to request written answers and revised quotes.

A small confirmed subtotal is not the same as the final amount payable.
Every alternative must be comparable, and one total upper bound must be strictly below every competing lower bound for a single lower-cost option to appear.
A tie or overlapping range indicates that the entered price evidence does not settle the choice; review warranty, maintenance and installation terms as well.

TXT export and printing prepare a document for you to share; they do not send it to a supplier or request a contract.
Remove unnecessary identifying data or sensitive security details before sharing.
After receiving revised quotes, update the inputs and calculate again to see which specifications and costs changed.

Practical uses and the limits of a numerical comparison

New premises and additional cameras

For an entrance, checkout and storage area, establish the common camera plan before comparing supplier proposals.
When extending an existing installation, check whether additional cameras also require more recorder channels, PoE power and licenses.

Changed retention or recording settings

Changing confirmed retention days or average bitrate changes required TB.
Before lowering settings to fit existing disks, check whether image quality still serves the operating purpose, and compare a supported storage expansion against the revised quote terms.

The calculation does not evaluate field of view, blind spots, image quality, privacy safeguards, signs, access rights, security settings, network outages or equipment life.
Sufficient total cable length does not confirm acceptable distance on each run, power delivery or site access.
Passing the entered numerical checks does not guarantee field performance or successful recording, and lower cost refers only to the alternatives entered, not the entire market.

Frequently asked questions

Can I enter the hard-drive capacity printed on a CCTV quote?

Enter usable recording capacity confirmed for the final configuration, because raw disk capacity can differ after formatting, array settings and reserved space; do not apply an unverified conversion ratio from another product.

Must every CCTV installation retain footage for 30 days?

The calculator does not determine a universal legal retention period: enter days confirmed for your purpose, applicable rules and operating policy; the initial field is blank and the fictional 14-day example is not legal advice.

Do enough PoE ports imply enough power?

Port count and the total power budget are separate constraints, and sufficient total watts still do not confirm individual port power standards or compatibility with the connected cameras.

Is an expansion price enough to calculate the shortfall cost?

The expansion increment, price bounds, final capacity ceiling and compatibility must all be confirmed for each deficient resource, together with simultaneous operation and the absence of duplicated costs between rows.

Can spare channels compensate for insufficient storage?

Channels, storage, licenses and power are different resources, so surplus in one row cannot offset a shortage in another; each deficient specification needs its own supported resolution.

Should an unconfirmed extra charge be entered as zero?

A blank means unconfirmed, whereas zero is an explicitly confirmed amount: leave the charge blank unless the supplier has confirmed free expansion, so unresolved items continue to withhold the corrected total.

Why is the apparently cheaper quote not marked as the lower-cost option?

All alternatives must have confirmed specifications, compatibility, installation scope and cost bounds, and one total upper bound must be strictly below every other lower bound; ties, overlapping ranges or an unresolved competing quote withhold the decision.

How should one recorder replacement that changes several resources be entered?

Do not charge the same replacement again under channels, bandwidth and storage: enter a separate quote alternative with the replacement configuration’s included capacities and package price.

Does saving the TXT report automatically request a supplier quote?

Saving downloads the comparison and questions to your device without contacting a supplier or creating a contract; remove unnecessary personal data and internal security details before sharing the file.

Official sources and the 2026 verification basis

Sources were checked on 2026-11-16.
The Korean Personal Information Protection Act was verified through the National Law Information OPEN API as current MST 283839, effective 2026-09-11; Article 3 addresses minimum processing necessary for the purpose and Article 21 addresses destruction when data is no longer needed, with retention exceptions under other laws.
The Enforcement Decree was verified as current MST 291731, effective 2026-11-10; Article 25 covers recording hours, retention period, storage location and processing method in the operating policy.

The Korean privacy references explain the Korea-based legal context; the numerical storage and resource calculations are not a legal determination for Korea or any other jurisdiction.
Product documents support the distinction between specifications and are not model or price recommendations.
WRN-1610S is marked discontinued, so consult current support information for the equipment actually quoted.
Recheck the inputs when laws, purpose, operating policy, model, firmware, storage array, licenses, power configuration, quotes or tax terms change.

Take the shortfall matrix to your supplier

Enter the inclusions from your written quotes, then start with deficient resources and unresolved questions.
Obtain written confirmation of usable capacity after expansion, supported increments, ceilings, compatibility and price bounds before relying on a corrected total.
For long-term ownership and rental spending, continue with the CCTV purchase and rental total cost calculator.

Related calculators