Table Order Contract and Order Fee Comparison

Compare two actual table-order quotes using the same tables, terminals, order volume, gross fees, discounts, contract periods, and documented exit settlements.

1. Common store and ordering assumptions

Use table-order billed revenue rather than all store sales. Match how repeat orders, cancellations and payment approvals are counted. Tables and required terminals are separate. Monthly order revenue is limited to KRW 1 trillion; aggregate cost to KRW 10 trillion.

Actual quote A

Variable order / payment fees

Payment mode never adds a PG fee automatically. Do not add payment fees again if already included in the order-value rate. Enter confirmed zero for no separate payment fee; its share may be blank when that rate is zero.

Discounts and exit settlement

The quoted settlement month must equal the common horizon. After changing the horizon, obtain a settlement for the new month.

When comparison ends at maturity, the maturity charge is used.
Remaining payments inside settlement are not added again. Deposits and refunds need a separate cash plan and are outside these totals. Discount duration may be blank if the discount is zero.

Actual quote B

Variable order / payment fees

Payment mode never adds a PG fee automatically. Do not add payment fees again if already included in the order-value rate. Enter confirmed zero for no separate payment fee; its share may be blank when that rate is zero.

Discounts and exit settlement

The quoted settlement month must equal the common horizon. After changing the horizon, obtain a settlement for the new month.

When comparison ends at maturity, the maturity charge is used.
Remaining payments inside settlement are not added again. Deposits and refunds need a separate cash plan and are outside these totals. Discount duration may be blank if the discount is zero.

Related calculators

Compare the full cost of two table-order contracts

A low monthly device price does not always produce the lower table-order bill.
Revenue-linked charges, minimum billed devices, installation, discounts and the settlement required when leaving a contract can change the result.
This calculator puts two actual quotes on the same table count, required-device count, order volume and comparison period before comparing their costs.

This English page uses the same calculation as the Korean page.
Amounts remain in Korean won (KRW) for Korean-market quotes; there is no currency conversion or invented US-dollar pricing.
The source review date is November 18, 2026 (2026-11-18), rather than the effective date of a universal tariff.
No statutory payment rate, tax rate or termination formula is supplied.

The result compares entered contract costs, rather than estimating additional sales or labor savings from installing table-order devices.
Those benefits need separate operating evidence.
Use the comparison to identify the charges that make the quotes differ, then ask the suppliers for written confirmation before selecting a contract.

Actual quotes and fictional examples stay separate

The actual-quote screen starts with blank prices.
A blank means unknown, rather than free.
The example button loads a fictional explanation of the method, not a vendor tariff or market average.
Editing an example does not turn its remaining assumptions into verified quote evidence.
Reset to actual-quote entry and enter the source documents and confirmation dates when starting a real comparison.

Align tables, required devices and order definitions

Tables and required ordering devices

Table count describes the restaurant, while required-device count is the quantity used for recurring device costs.
The two are independent inputs.
Confirm whether devices are shared and whether spare units, an administration tablet, chargers or network hardware are required.
Match the service and equipment scope across both quotes.

Monthly orders and amount per order

Use the monthly orders and order value that are actually subject to the table-order charges.
Do not substitute all restaurant revenue unless the contract uses that same base.
Confirm how additional orders, cancellations and split payments are counted in each quote.

A party may make an initial order and two additional orders but pay with one card authorization.
That can mean three order events and one payment event.
Entering a payment-event fee directly as though it applied to each order would overstate that fee.
If a quote has an additional per-payment charge, convert it to a cost per order using the evidenced relationship between payment events and order events before entering it here.
Use the same counting convention for both contracts.

A supplier may charge for a minimum number of devices even when fewer are required.
The model therefore bills the larger of the common required-device count and that quote’s minimum billed count.
A cost calculation does not establish that a device package meets the restaurant’s operational requirements.
Confirm the equipment and support scope before marking it as comparable.

Separate quote components without charging them twice

  • Monthly fixed charges: multiply billed devices by the monthly device price, then add platform/support and recurring network/other fixed charges.
    Do not add maintenance again when the device fee already includes it.
  • Upfront charges: separate installation/setup/training from one-time network and required-hardware costs.
    Include administration tablets, routers, chargers and hardware purchases only where required, and count each item once.
  • Order-value rate: enter the final rate charged on the relevant order revenue.
    If processing is already included in that rate, enter a confirmed zero for the separate processing rate.
  • Separate processing rate and eligible share: enter only an additional processing charge.
    The share describes the proportion of order value actually subject to that extra rate.
    It is not automatically set by choosing prepaid service.
  • Per-order cost: enter the additional final cost per billable order.
    Convert any payment-event fees to the same order definition first, and avoid duplicating a fee already included in a percentage rate.
  • Fixed monthly discount and duration: use the confirmed amount and number of qualifying months.
    Check advertising, minimum-use or bundle conditions.
    A revenue-linked discount belongs in the final applicable rate, rather than this fixed-discount field.
  • End settlement: use the supplier-confirmed final charge for the chosen exit month, covering applicable remaining rent/installments, discount clawbacks and return/removal costs.
    Do not add those same costs elsewhere again.

The quoted early-settlement exit month must match the end month of the selected common comparison period.
If you change the horizon, obtain a new written settlement for the revised exit month rather than reusing an earlier month’s amount.
For an exit before contract maturity, an unknown or mismatched settlement month holds the period total and lower-cost comparison.

Use final tax-inclusive billing amounts and rates

Every entered price and rate must use the same final tax-inclusive basis.
If one quote lists a tax-exclusive supply price and the other gives a final amount, request a comparable final quote from the supplier.
The calculator does not add a fixed VAT rate or estimate input-tax credits.
Leave the tax-confirmation check incomplete until the billing basis is verified.

Prepaid or postpaid does not automatically set a processing fee

Prepaid service takes payment when the customer orders, while postpaid service takes payment after the meal.
Here, that choice records the operating arrangement and does not switch on a preset charge.
Even prepaid contracts can have different fee structures, so the rate must come from the actual agreement and settlement statement.

TOrder’s official processing FAQ states its own position on separate payment charges beyond its quoted monthly service fee.
That statement must not be expanded into a rule for every table-order provider or into a claim that existing card-merchant fees disappear.
If a card cost is common to both options and excluded from this comparison, exclude it consistently.
Retain charges that are additional under only one quote.

MenuIt’s OrderPad page distinguishes prepaid/postpaid products and advertising-related price conditions.
A displayed monthly price alone does not establish the final equipment, installation, tax or return scope.
Confirm the billing unit and included items in the individual quote before using the amount in a comparison.

Monthly budgets and total-payment formulas

Let H be the common comparison months, O the monthly order count, P the amount per order and D the discount months.
The calculation assumes the same monthly orders, order value and linear rates throughout the period.
It does not silently add inflation or restaurant growth.

Billed devices, fixed costs and upfront costs

N = max(required devices, minimum billed devices)
F = N × monthly device price + platform fee + monthly network/other fixed fees
U = installation/setup + one-time network/required hardware

Variable coefficient and monthly billing

V = P × (order rate / 100 + separate processing rate / 100 × eligible share / 100) + per-order fee
Normal month = F + O × V
Discount month = F + O × V − monthly discount

Total for the common period

C(H) = U + H × (F + O × V) − min(H, D) × monthly discount + E(H)
Monthly average = C(H) / H
Revenue cost ratio = C(H) / (H × O × P) × 100

When H is shorter than the contract, E(H) is the confirmed early-exit settlement for that month.
When H equals the contract term, E(H) is the maturity-end charge.
The monthly average allocates upfront and end costs across the period; it is not necessarily the amount on a recurring invoice.
If monthly order revenue is zero, the revenue cost ratio is undefined and is not shown as zero percent.

For example, a separately billed processing rate of 2% applied to 50% of KRW 20,000,000 in monthly order value adds KRW 200,000 per month.
A KRW 20,000 fixed discount applied for three months reduces period cost by KRW 60,000.
These are arithmetic illustrations, not recommended rates or discount terms.

Common-period cost versus each contract’s own full-term cost

Comparing a 24-month contract’s full-term total with a 36-month contract’s full-term total can favor the shorter period simply because it covers fewer months.
First choose the same H months for both, then include the confirmed settlement required at that endpoint.
Read each contract’s own full-term total as a separate reference.
Different-length totals are not the basis for choosing the lower-cost quote.

No invented continuation after contract expiry

If the common horizon exceeds either contract term, renewal pricing is unconfirmed and the common-period comparison is held.
The model does not assume that the old monthly fee or discount continues after expiry.
Choose a period within the confirmed terms, or obtain a new quote covering the intended renewal arrangement.

An early-exit settlement is not an invented penalty calculated as a universal percentage of remaining rent.
Give the supplier the intended exit month and obtain the charge and included components in writing.
The end-settlement input represents gross expenditure before any refundable-deposit offset.
Deposit payments and refund timing need a separate cash plan and are not deducted from this model’s expenditure total.

Step-by-step use with actual documents

  1. Record the quote name, source-document reference and confirmation date, then match required services, devices and accessories.
  2. Enter one shared table count, required-device count, comparison horizon, billable monthly order count and amount per order.
  3. Separate recurring fixed, upfront, order-percentage and per-order charges.
    Check that network and processing costs have not already been included elsewhere.
  4. Confirm discount duration, the settlement at the chosen endpoint and any maturity-end charge.
    Enter zero only when the absence of a cost has been confirmed.
  5. Complete the comparable-scope and tax-inclusive checks, review unresolved items, then read the monthly budget, common-period total and order-volume crossover together.
  6. Save the inputs and results as TXT or print them, and obtain written clarification of the components that drive the cost difference.

A partly edited fictional example can still contain assumptions that do not belong to a real quote.
Keep its example label in view and do not present the result as an established supplier advantage.
For an actual decision, reset to the blank actual-quote form and fill it from the documents.
Data entered here is not automatically a contract, invoice or verified procurement record.

Worked fictional example: lower device rent, higher total

This example is unrelated to any supplier’s prices.
Assume 10 tables, 10 required devices, a 24-month common horizon, 1,000 monthly orders and KRW 20,000 per order.
Both quotes have a 36-month contract, KRW 300,000 upfront cost, a KRW 200,000 settlement at month 24, and a confirmed zero maturity charge.
Fixed discounts, separate processing and per-order fees are also confirmed zero for this illustration.

Tax-inclusive KRW costs of fictional table-order quotes A and B at the same order volume and horizon
ComponentFictional AFictional B
Monthly price per deviceKRW 10,000KRW 15,000
Order-value rate0.5%0%
Monthly fixed costKRW 100,000KRW 150,000
Monthly variable costKRW 100,000KRW 0
Normal-month budgetKRW 200,000KRW 150,000
24-month total paymentKRW 5,300,000KRW 4,100,000
Own 36-month full-term totalKRW 7,500,000KRW 5,700,000

Monthly order revenue is 1,000 × KRW 20,000 = KRW 20,000,000.
Quote A’s 0.5% charge adds KRW 100,000 to its KRW 100,000 fixed cost, making the monthly budget KRW 200,000.
Its 24-month total is 300,000 + 24 × 200,000 + 200,000 = KRW 5,300,000.
Quote B totals KRW 4,100,000, which is KRW 1,200,000 lower under these assumptions.

For A, dividing period cost by period order revenue gives approximately 1.1042%.
That total-cost ratio includes more than the 0.5% order-value rate and should not be described as the contractual processing rate.
At maturity, the own-term totals use 36 months and the zero maturity charge instead of the month-24 settlement.

Interpret the break-even order volume correctly

Break-even here means the monthly order volume at which the two contracts have equal total cost.
It is not the restaurant’s operating-profit break-even revenue.
Let K be each quote’s fixed total for the common horizon, including upfront costs, fixed recurring costs, fixed discounts and end settlement.

K = U + H × F − min(H, D) × monthly discount + E(H)
O* = (K_B − K_A) / (H × (V_A − V_B))

The fictional example crosses at 500 orders per month, or KRW 10,000,000 monthly order revenue, with the same KRW 20,000 order value.
A costs less at 499 orders and B costs less at 501 orders.
At exactly 500 orders the totals tie.
A fractional crossover is a mathematical boundary and does not establish a tie at an integer order count.
Read the lower-cost option below and above the boundary together.

If both quotes have the same variable coefficient, changing order volume does not change their cost gap.
When their fixed totals are also equal, they tie at every order volume.
When fixed totals differ, there is no crossover.
A crossing at a negative order volume is outside the usable nonnegative-order range.
If the crossing is at zero, the relative variable costs determine the cheaper option once orders become positive.

The crossover assumes unchanged order value, included services, rates and exit costs.
It does not predict how many orders a restaurant will receive.
Obtain a new calculation for a different order mix or contract amendment, rather than treating the displayed boundary as a permanent market rule.

Review the assumptions that matter for your restaurant

Frequent additional orders

Do not confuse value per order event with the final bill per table.
Confirm whether additional orders trigger separate per-order charges and which share of their value is subject to a processing rate.
Use recent order and payment records to align the units.

Potential closure or relocation

If expected use is shorter than the contract, obtain a settlement for the intended exit month.
Do not assume that relocation, contract transfer, device returns and discount clawbacks have the same treatment.
The monthly device fee alone is insufficient for that decision.

A small number of tables

Check whether minimum billed devices exceed actual needs.
Compare complete packages that include required administration and network hardware.
A quote missing essential accessories is not directly comparable with a fully specified one.

Advertising or bundle discounts

Confirm whether advertising display or another service must remain active to keep the price.
Apply a fixed discount only for the confirmed months.
Ask whether leaving early or failing a condition creates an additional settlement charge.

Unknown values, confirmed zeros and unsupported fee structures

Blank means unconfirmed; zero means the absence of a charge has been verified.
A missing installation line does not prove installation is free.
A complete lower-cost conclusion is held when required prices, rates, discounts, settlements or billing confirmations are missing.
Comparable scope and final tax-inclusive treatment must also be established.

Supported inputs are 1–1,000 tables and required devices, 1–120 comparison or contract months, 0–10,000,000 monthly orders and KRW 0–1,000,000,000 per order.
Individual costs support KRW 0–1 trillion; monthly order revenue supports up to KRW 1 trillion and aggregate costs up to KRW 10 trillion.
Exceeding these limits, entering negative values or using non-finite numbers holds the calculation as an input error; values are not silently converted to zero or clamped to the limit.

  • Minimum processing fees, tiered rates, free-order allowances and volume-linked discounts cannot be represented faithfully by one linear rate.
    Obtain supplier quotes for the intended volumes and compare those scenarios separately.
  • Refundable-deposit payments and refunds, loss/damage charges, input-tax credits, financing and the value of ancillary services are outside the model.
    Prepare additional cash and risk analysis when they affect the decision.
  • A fixed monthly discount larger than monthly fixed charges does not fit this model’s discount structure.
    Ask whether the item is an order-value discount or a one-time subsidy and classify it correctly before comparing.
  • Totals do not assess service quality, security, outage response, POS compatibility, the legal validity of termination charges or vendor suitability.
    Those questions need their own evidence and review.

The calculator preserves calculation precision before formatting currency for display.
Rounded displayed amounts may differ slightly from sums of rounded line items.
Final invoices can also use their own rounding and billing-event rules; obtain those rules when a small difference matters to the contract decision.

Frequently asked questions

Must prepaid service have a separate processing fee?

No.
Prepaid and postpaid describe operating arrangements.
Enter a confirmed zero if there is no extra processing charge, or leave the field unknown and ask the supplier.
The selection alone does not change the formula.

What if table count and required devices differ?

Enter both separately.
Recurring device cost uses the larger of required devices and the quote’s minimum billed devices.
Confirm whether administration, spare and accessory hardware is included in the compared scope.

Does a blank field automatically become free?

No.
An unknown field differs from a confirmed zero.
Missing required quote values or confirmations hold the completed comparison and remain items to clarify with the supplier.

Can contracts with different terms be compared?

Use one common period within the confirmed terms and enter the settlement required at that endpoint.
Own full-term totals may cover different durations, so do not select a winner from those totals alone.

What happens when the horizon exceeds one contract term?

The common-period comparison is held because renewal terms are unconfirmed.
The model does not extend an old monthly fee or discount automatically beyond expiry.

Does the calculator add VAT?

No fixed VAT rate is added.
Enter final tax-inclusive billing amounts and rates, then confirm that basis for both quotes.
Resolve mixed tax-exclusive and tax-inclusive quotes with the suppliers first.

Can a refundable deposit reduce the end-settlement input?

The settlement input is gross expenditure before refundable-deposit offsets.
Confirm remaining rental, installments, discount recovery and return charges.
Plan deposit payments and refunds separately.

Is 500 monthly orders the break-even point for every restaurant?

No.
It belongs only to the fictional prices, 24-month horizon and KRW 20,000 order value in this guide.
Actual fixed charges, rates, discounts and settlements change the boundary, and a usable crossover may not exist.

Official sources and review date

Official guidance reviewed on November 18, 2026 (2026-11-18).
Publication or revision dates were not displayed on the reviewed product/FAQ pages, so the review date is not a pricing effective date.
These sources explain service and charging distinctions; their advertised monthly prices have not been copied into calculator defaults.

This is a cost comparison of user-confirmed contract inputs, not a statutory-fee or termination-right calculation.
Recheck the actual documents, billable base, tax treatment, devices, discount period, end settlement and subsequent supplier-guidance changes for each procurement decision.

Request a revised quote using the cost drivers

Send the supplier the required devices, order-count definition, included accessories, final rates, discount end month and intended exit settlement alongside the comparison.
If an item is missing, obtain a written quote for the same scope and calculate again.
TXT and printed results preserve the inputs, assumptions and unresolved items at the time of calculation; they do not replace the final contract or invoice.