Compare business VoIP quotes beyond the advertised line charge
This calculator aligns two actual business telephone quotes against one service requirement and one usage horizon.
A low monthly line charge can leave out handsets, representative-number services, installation, number porting or excess calling charges.
Start with the lines, numbers, devices and simultaneous calls your business needs, then compare payable amounts for offers that meet those requirements.
The model is intended for a small business owner opening a shop, moving an office or reviewing a supplier switch with a family member.
It uses user-entered written quotes rather than a market-price estimate or a standard supplier discount.
This English experience preserves the Korean business context: amounts are actual tax-inclusive Korean won, the model year is 2026, and the official product references were checked on 2026-11-17.
No statutory tax, eligibility or early-termination rate is applied.
Lines, concurrent channels, numbers and handsets are independent
Subscribed lines and telephone numbers
Line quantity is the subscription and basic-charge unit stated in the quote.
Number quantity is the number of telephone numbers needed for business calling.
A representative number or additional number may have a separate recurring charge; enter zero for that separate price only when the supplier confirms that it is already included.
Concurrent channels and handsets
Concurrent channels describe how many calls the supplier confirms can be connected at the same time.
Handsets describe the quoted devices used by staff.
Five devices do not establish five external calling channels, and the model does not infer one quantity from another.
Ask whether external forwarding changes the required capacity.
An offer below any common quantity requirement is not treated as a suitable low-cost option.
Leave unknown quoted capacity empty rather than replacing it with the requested amount.
Include any operational headroom in the requirement you send to both suppliers; the calculator does not design traffic capacity or certify equipment performance.
Prepare the original quotes before entering numbers
- Send both suppliers the same required lines, numbers, handsets, concurrent-call capacity and service horizon.
- Record the quote reference or version and actual confirmation date, then verify final tax-inclusive payable amounts and scope in writing.
- Select required number porting, call forwarding and representative-number features, and mark each offer included, excluded or unknown.
- Separate per-line and per-number fees, device payments, whole-account options, monthly discounts and their durations.
- Confirm billed monthly landline and mobile minutes, whole-account included allowances and excess per-minute prices independently.
- Confirm setup, porting, equipment, applicable exit settlement and any post-contract fixed monthly charge before comparing.
Use the same actual payable basis
Every money field uses tax-inclusive KRW payable, including excess calling unit prices.
The calculator does not add VAT again or apply a legal tax rate.
Ask the supplier to normalize a VAT-exclusive quotation before input, and do not mix gross payable figures with after-tax recovery or deductible-cost estimates.
Separate fixed charges, device payments and discount durations
Monthly fixed-charge calculation
Normal monthly fixed charge = quoted lines × per-line monthly price + quoted numbers × separate per-number monthly price + whole-account option fee.
Add handsets × per-handset monthly payment only through the device payment duration.
Subtract the whole-account monthly discount only through its stated discount duration.
This preserves a bill change when a device payment or introductory discount ends.
Use the payment duration confirmed for the actual rental or instalment arrangement.
Ownership transfer, return obligations and the distinction between a telephone sale and an accessory rental still require written confirmation.
A discount larger than that month’s fixed plus device charges is invalid input; the model does not silently clamp a negative monthly amount to zero.
A calling credit or complex bundle adjustment should be normalized by the supplier instead of being forced into this fixed-charge discount field.
Calculate landline and mobile excess usage in separate pools
Two independent allowance buckets
Landline excess charge = round(max(0, billed landline minutes − included landline minutes) × excess landline price per minute).
Calculate mobile excess separately with the same formula, then add the confirmed other-calls monthly total.
Unused landline allowance does not offset mobile usage.
Included minutes must be the confirmed aggregate allowance across the quoted account, not an assumed transferable allowance.
Decimal billed minutes and per-minute prices are supported, but the calculation does not round each individual call to a billing block.
For second-based tariffs, minimum call charges or per-call rounding, first obtain supplier-confirmed billed minutes and a tax-inclusive equivalent per-minute price.
When different billing rules cannot represent the same call record as a comparable billed-minute total, this model alone cannot reproduce the exact invoice.
Enter international, special-number or separately billed incoming representative-number charges in the confirmed other-calls monthly total.
Avoid counting calls there if they are already in either main bucket.
Zero usage is valid, while an unknown excess rate must remain unknown rather than being entered as free.
Align one service horizon with different contract terms
Ending before the commitment or device payments finish
A supplier-confirmed all-inclusive exit settlement is required when the common horizon is shorter than the service commitment or the device payment duration.
It must reflect applicable termination and remaining device obligations for that actual end point.
After entering that settlement, do not add future service months or remaining device instalments again.
No legal penalty rate is estimated.
Continuing after the contract expires
Enter the entire post-contract fixed monthly charge separately.
This charge excludes device payments and discounts, which are applied independently; it replaces the earlier line, number and option fixed charges.
Confirm that calling allowances and excess rates remain unchanged.
If they change, obtain a period-specific revised quote rather than assuming continuation.
The supplier’s own-term total applies its own commitment months and is a separate reference output.
Do not directly rank totals that cover different numbers of months.
The decision uses the common service-horizon total.
If device payments extend beyond the commitment, the own-term amount can remain unknown because the device settlement at that contract end has not been established.
Check one-time installation, number-porting and equipment charges
- Setup is the confirmed total installation payment; normalize a per-line quote into the correct whole-account amount first.
- Porting is the total payable for the actual numbers and included migration work, rather than an assumed universal fee.
- Equipment can include outright device purchases and separately quoted cabling or PBX work within the agreed scope.
- Do not enter the same full handset purchase amount in both one-time equipment and monthly device payments; explicitly confirm zero where there is no separate charge.
Confirm reused equipment, ownership and any refundable deposit directly in the quotation.
The model does not automatically include deposit timing, resale value, first-month proration, future price rises or tax recovery.
When those matter, request a separate cash schedule and review it alongside this comparison.
An omitted item is not secretly included in the calculated result.
Worked fictional example: KRW 676,000 versus KRW 350,000 over 12 months
These synthetic figures demonstrate the formula and are not actual supplier offers or market averages.
Assume 5 lines, 5 numbers, 5 handsets and 3 concurrent channels, with 1,000 billed landline minutes and 500 billed mobile minutes each month.
Both examples have zero separate number charges, discounts and other-calls charges, and maintain the stated conditions for 12 months.
Fictional twelve-month business VoIP quote calculation in KRW| Item | Fictional A | Fictional B |
|---|
| Per-line monthly price | 3,000 | 4,000 |
| Per-handset monthly payment · 12 months | 1,000 | 0 |
| Whole-account options per month | 5,000 | 5,000 |
| Included landline minutes per month | 600 | 1,000 |
| Included mobile minutes per month | 200 | 500 |
| Excess landline / mobile price per minute | 20 / 50 | 20 / 50 |
| Monthly calling charge | 23,000 | 0 |
| Monthly recurring payment | 48,000 | 25,000 |
| One-time initial total | 100,000 | 50,000 |
| Twelve-month payable total | 676,000 | 350,000 |
Separate an arithmetic difference from a recommendation
A’s calling charge is (1,000 − 600) × 20 + (500 − 200) × 50 = KRW 23,000 per month.
A totals 100,000 + 48,000 × 12 = KRW 676,000, while B totals 50,000 + 25,000 × 12 = KRW 350,000.
The arithmetic difference is KRW 326,000.
Example mode still holds the lowest-cost decision because synthetic entries do not verify a real contract.
Start a new actual quote, transfer the original figures and complete the source and scope checks.
Interpret known subtotals and held decisions correctly
An empty field means unconfirmed; zero means confirmed free or included.
When a required monetary component is missing, the result can show only the subtotal supported by known inputs and leave the complete total unknown.
Because missing discounts or settlements may also exist, this known subtotal is neither a lower bound nor an upper bound and is not a confirmed quotation.
Resolve the questions before selecting an offer simply because its subtotal is smaller.
A lowest-cost or tie decision requires both offers to satisfy the quantity and required-feature checks, preserve a quote reference and confirmation date, confirm the payable scope, and include all needed costs.
Verifying only one offer does not establish the lowest cost across both.
Complete amounts cannot make insufficient concurrent capacity or an excluded required porting feature suitable.
After an edit, recalculate and retain a report generated from the same input snapshot.
Read 80%, 100% and 120% calling scenarios with the monthly ledger
The sensitivity table scales base billed landline and mobile minutes to 80%, 100% and 120%, leaving allowances and unit prices unchanged.
It does not scale the confirmed other-calls total or automatically add lines, numbers, handsets or concurrent channels.
For fictional A, the 80% calling charge is KRW 4,000 landline plus KRW 10,000 mobile, or KRW 14,000; at 120% it is KRW 32,000.
Ask whether the higher traffic would require a capacity change outside this arithmetic scenario.
The first recurring month is not a prediction of a first invoice that includes setup or an exit settlement.
The average monthly cost divides the common-horizon total by the number of months and can differ from each actual recurring bill.
Use the month-by-month ledger to inspect the end of device payments and discounts, then review the one-time costs and required settlement alongside it.
Scenario costs retain the underlying suitability and confirmation limitations.
Use the report for opening, expansion and supplier-switch discussions
Opening a shop or adding staff
Confirm the peak concurrent calls needed for bookings and orders before choosing the number of devices.
Send the same number plan, representative-number arrangement and cabling scope to both suppliers.
If you need spare capacity for additional staff, include it in the common requirement so the report preserves that decision.
Keeping numbers while moving or switching
Check number-porting feasibility, relocation work, extra LAN cabling and device reuse independently.
Overlapping service periods and the old contract’s exit payment can be separate cash outflows outside the new setup quote.
Obtain a separate schedule for any existing-contract cash flows omitted from the entered scope.
Save the TXT report or print the results with the common horizon, quote identifiers, confirmation dates, amounts and unresolved questions.
Send the questions to the supplier, obtain a revised written quote and update the source and figures before recalculating.
The report records the input state at calculation time; changes to a contract require a fresh calculation.
Confirm equipment return, ownership and activation dates in the actual contract documentation.
Frequently asked questions
Do five handsets guarantee five simultaneous calls?
Handsets are physical or quoted endpoint quantities, while concurrent channels are the confirmed simultaneous calling capacity.
Ask the supplier for each quantity independently and whether forwarding consumes additional external capacity.
Can I multiply the free allowance by the number of lines?
Only after the supplier confirms that the resulting whole-account allowance is valid for the quoted pooling rules.
Enter the confirmed aggregate allowance, and do not transfer unused landline minutes into the mobile bucket.
Can I enter a VAT-exclusive price?
All monetary inputs use actual tax-inclusive KRW payable.
Obtain the final payable amount from the supplier before entering it; the calculator does not apply a statutory tax rate or recover input VAT.
Why do an empty field and zero produce different results?
An empty field is unconfirmed, whereas zero confirms that an item is free or included.
Missing costs leave a known subtotal rather than a complete total, and that subtotal is neither a lower bound nor an upper bound.
How should different commitment lengths be compared?
Use one common service horizon and obtain any required early-end settlement or post-contract fixed charge.
Each supplier’s own-term total is a separate reference and cannot be ranked directly against a different number of months.
Should I add remaining handset instalments separately?
The supplier-confirmed all-inclusive exit settlement must include applicable remaining handset obligations and service termination amounts.
Do not then add future device instalments or remaining service charges again.
Why is the cheaper fictional example not recommended?
Synthetic inputs demonstrate arithmetic and are not evidence of an actual offer or written confirmation.
Example mode holds the lowest-cost decision; start a new actual quote and verify its source, date and scope.
Does the report replace an activation contract?
The report compares only the entered scope.
It does not approve number portability, installation feasibility, recording or privacy compliance, service quality, outage compensation or the final bill; send the questions to the supplier for a revised written quote.
Official sources and conditions to recheck
Official product information was checked on 2026-11-17.
These sources support separating service, calling, device, installation and optional charges; their public prices are not fixed as customer-specific defaults.
This 2026 quote-arithmetic model does not automatically determine a statutory tax rate, termination charge or portability eligibility.
For every contract, recheck the actual quote version, commitment and device durations, discounts, calling pools, tax-inclusive payable amounts and the all-inclusive settlement scope.
Product information can change, and the report does not establish service quality, security, recording or privacy compliance, or network performance.
Prepare an activation decision with matching revised quotes
Enter the two original offers above, then resolve capacity shortages and questions first.
Recalculate using confirmed amounts and scope, and share the report with the supplier to review device, number, installation and exit costs beyond the line charge.
If internet connectivity and office cabling are changing as well, continue with the related tools below.