Commuter Bus Routes & Monthly Contract Quote

Check peak vehicle overlap using passenger capacity, fixed daily runs and deadhead or turnaround buffers.
Review monthly trips, received contract quotes and reference route allocations in Korean won.

1. Repeating daily timetable and monthly contract

Every run repeats once per operating day below. Enter inbound and outbound trips separately. Calculate different weekday patterns separately and avoid adding the same monthly base twice. Normalize actual quotes to tax-inclusive KRW.

1–31

2. One-way run 1

1–500

1–100

0–720 · confirmed included/free = 0

0–720 · confirmed included/free = 0

Vehicles = passengers ÷ passenger capacity, rounded up. Assumes identical vehicle capacity and conditions within each run. Run plus pre/post occupancy must not exceed 24 hours. Confirm inter-route transfers and driver rest separately with the operator.

3. Actual monthly quote and additional charges

Monthly base is the total for the whole contract, not a per-vehicle rate. Normalize inclusions and overage to one vehicle on one one-way trip. Replacement rate is only the incremental charge not already counted in base or overage. Leave unknowns blank; enter zero for confirmed included/free items.

0–1,000,000,000 · confirmed included/free = 0

0–310,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

0–10,000

0–1,000,000,000 · confirmed included/free = 0

0–1,000,000,000 · confirmed included/free = 0

Enter the actual timetable and quote, then calculate. Editing inputs hides the previous result until recalculation.

Check simultaneous bus demand alongside the monthly commuter contract

Three commuter routes do not automatically mean that three buses are sufficient.
Simultaneous departures, the passengers on each service, empty positioning and turnaround time all affect how many vehicles are occupied at once.
Conversely, adding separate vehicles for every morning and evening service can overstate the fleet requirement when the same vehicles might be reused.

This tool helps small-business owners, HR teams and administrators check a confirmed recurring timetable against a received monthly transport quote.
It calculates a lower bound on simultaneous vehicle demand and checks the arithmetic of the actual contract.
Enter supplier-confirmed amounts rather than treating the fictional example as a market price guide.
All money uses final tax-inclusive Korean won, KRW, in the context of a Korean transport contract.

Two separate results to review before contracting

The operating result is the maximum number of vehicles simultaneously occupying the entered intervals.
The financial result adds the whole-contract monthly base amount, excess services, nonduplicated replacement-service increments and other monthly extras.
A calculated cost does not approve an actual vehicle or driver assignment, or establish safe operation.

Prepare one-way services that repeat on the same working days

Each row represents one one-way service repeated on the common working-day pattern.
Create separate rows for morning and evening travel even when the same employees ride both.
Distinguish departures, directions and repeated runs with clear names.
The same working-day count applies to every row, so the model suits contracts with an identical daily timetable.

Service name, passengers and passenger seats

Include direction or departure information in the row name.
Passengers are the people carried on that one-way service; capacity means supplier-confirmed passenger seats excluding the driver.
Do not infer the actual seating from a vehicle label or assume that standing passengers are permitted.

Departure, arrival and next-day arrival

Enter times in 24-hour HH:mm format.
Select next-day arrival when a service crosses midnight so its duration is unambiguous.
Correct equal same-day times or an invalid time order before calculating, and consider whether occupancy after a late arrival overlaps the following day’s early service.
Next-day arrival at the same clock time as departure already spans 24 hours, so both positioning and turnaround occupancy must be zero.

Review different weekday patterns separately.
A busiest-day template can help assess peak vehicle demand, but multiplying that template by every monthly working day may overstate actual monthly services.
Do not repeatedly add the same whole-contract monthly base amount across pattern calculations.
For differing schedules, request a quote reconciled to the actual monthly service ledger.

Extend occupied intervals for positioning and turnaround

Vehicle and occupancy formulas

Vehicles for a row = ceil(passengers / passenger seats)
Occupancy start = departure − pre-departure empty-positioning time
Occupancy end = arrival + next-day adjustment + post-arrival turnaround, rest and empty-movement occupancy
Peak vehicle lower bound = maximum occupied vehicles across the daily timetable

ceil rounds up to the next whole number.
A fictional service carrying 60 passengers in vehicles with 40 passenger seats requires two vehicles at the same time.
Both vehicles occupy the full interval for that row and are added to any other services occupying the same time.

The start of an interval is included and its end is excluded.
An interval ending at 08:30 therefore does not mathematically overlap an interval starting at exactly 08:30.
If repositioning or handover requires time, enter the supplier-confirmed minutes in the relevant buffer.
Intervals crossing midnight are split on a circular, daily recurring timetable, allowing late occupancy from the preceding day to overlap an early service.

An unknown buffer does not mean no time is required

Blank buffers are treated as zero minutes only for the provisional arithmetic, while remaining unresolved.
The displayed peak may consequently be too low.
Even completed buffers do not prove route-to-route connectivity, individual vehicle assignments, driver work and rest compliance, standby availability or breakdown response.
The operator must review those conditions.

Normalize the allowance to one vehicle making one one-way trip

Monthly volume counts vehicle one-way trips rather than route names.
A row requiring two vehicles contributes two daily vehicle trips; an evening return contributes separately even if the passengers are the same.
Check whether a supplier’s quoted round trip corresponds to two one-way services before entering its allowance.

Monthly excess-service formulas

Daily vehicle one-way trips = Σvehicles required by each row
Monthly vehicle one-way trips = daily vehicle trips × common working days
Excess trips = max(0, monthly vehicle trips − included monthly vehicle trips)
Excess charge = excess trips × amount per excess vehicle one-way trip

An unknown allowance leaves both excess volume and its cost unresolved.
When a confirmed allowance covers the entire entered volume, the current excess charge is zero even if the excess rate is blank.
Distance or time-of-day surcharges, separate allowances by route and tiered rates cannot necessarily be represented by one allowance and one rate.
Ask the supplier for a quote expressed on a consistent basis.

Add the whole-contract base and only nonduplicated extras

The base is the entire monthly contract amount

Enter the monthly base for the whole timetable, rather than a monthly price per vehicle.
If the quote only gives a per-vehicle rate, first confirm the contracted fleet and included scope with the supplier and establish the total base amount.
The calculator does not multiply the entered base by the peak vehicle count again.

Replacement services add only the incremental difference

Multiply monthly replacement vehicle one-way trips by the extra amount per replacement trip.
Exclude amounts already counted in the regular base or excess-service charge.
Adding the full replacement fare, or adding the same replacement as another regular row, can double-count costs.

Monthly quote total = whole-contract monthly base + excess charge + replacement increments + other monthly extras

Check whether driver expenses, tolls, parking and other costs are already included; enter only separately payable monthly extras.
Normalize every amount to final tax-inclusive KRW; the model does not apply an assumed statutory tax rate.
Zero replacement trips produce zero replacement cost even when the rate is unknown, but the contract should still clarify the terms for future replacements.

Distinguish blanks, verified zeroes and confirmation checks

Blank means unknown

An omitted extra is not assumed free.
When necessary amounts or allowances remain blank, review the known subtotal together with its missing-item list.
Do not treat that subtotal as the final monthly payment.
A missing quote-check date or unconfirmed financial scope also prevents a confirmed monthly total.

Zero means inclusion or no extra charge was verified

If the supplier confirms that tolls are included in the base, their additional charge can be entered as zero.
Use that value after checking the original inclusions.
Recording a check date does not authenticate the quote or guarantee that it remains valid.

Timetable and capacity checks, financial inclusion checks, and operator review of positioning, driver rest and standby arrangements are separate matters.
Operating warnings can remain even when the cost arithmetic is complete.
Selecting every confirmation does not make the tool a vehicle or driver assignment system, or a legal and safety approval.
Confirm the actual operating plan with the transport provider.

Fictional example: check a three-vehicle peak and KRW 6,400,000 month

This example explains the arithmetic and is not a current market quote.
Assume zero pre-departure positioning for all rows and 22 common working days.
The figures illustrate a quote whose timetable, capacity, costs and required financial confirmations have been checked.

  1. A morning: 60 passengers, 40 passenger seats, travel from 07:00 to 08:00, followed by 30 minutes of occupancy; two vehicles remain occupied until 08:30.
  2. B morning: 30 passengers, 40 passenger seats, travel from 07:30 to 08:30 with zero post-arrival occupancy; one vehicle is required.
  3. A evening: 60 passengers, 40 passenger seats, travel from 18:00 to 19:00 followed by 30 minutes of occupancy; two vehicles are required.

Operating volume

The peak is three vehicles from 07:30 to 08:30.
Daily volume is 2 + 1 + 2 = 5 vehicle one-way trips, and monthly volume is 5 × 22 = 110 trips.
The operator must verify whether the morning vehicles can be reused for the evening services.

Monthly cost

A KRW 6,000,000 monthly base includes 100 trips; 10 excess trips at KRW 20,000 add KRW 200,000.
Two replacement increments at KRW 50,000 add KRW 100,000, and other extras add KRW 100,000.
The total is KRW 6,400,000.

A morning contributes two of the five daily vehicle trips, so its illustrative allocation is KRW 6,400,000 × 2 / 5 = KRW 2,560,000.
Its monthly passenger boardings are 60 × 22 = 1,320, giving approximately KRW 1,939.39 per passenger boarding.
This is neither an employee’s monthly contribution nor a supplier-confirmed route invoice.

Use route allocations only as an internal management reference

Allocation formulas

Illustrative row allocation = confirmed monthly total × row vehicles / sum of vehicles across all rows
Monthly passenger boardings for a row = passengers on that one-way service × working days
Reference cost per boarding = illustrative row allocation / monthly passenger boardings

Vehicle-trip weighting is one arbitrary management allocation of a common monthly cost.
It does not automatically reflect distance, travel duration, tolls or the route where replacement service occurred.
Do not use it as a route profitability finding or a settlement invoice.
If the supplier quotes actual route amounts, check those amounts and their underlying basis separately.
Rounding displayed values can also make the sum of rows differ slightly from the overall total.

The same employee riding morning and evening contributes two boardings.
Summed row passengers are not a count of distinct employees, and cost per boarding must not be automatically converted into a monthly payroll deduction.
Company support and employee contributions require a separate review of actual usage records, absences, joining and leaving dates, and the applicable company arrangements.

Work from the source quote to a written operator review

  1. Record the quote name or reference and check date, and establish the whole monthly contract scope and final tax-inclusive amounts.
  2. Enter every one-way row in the common daily pattern, including passengers, confirmed seats, times, positioning and turnaround occupancy.
  3. Reconcile working days, monthly base, allowance, excess rate, replacement increments and other monthly extras with the original quote.
  4. Review peak windows, the vehicle lower bound, monthly trip volume, known subtotal and unresolved items together.
  5. Save the TXT review or print it, then request written confirmation of route connections, driver rest, standby and replacement arrangements, and extra-charge terms.

After headcount grows, recalculate the rows approaching a passenger-capacity threshold.
Changing a departure might reduce the arithmetic peak, but commuting convenience, roads and driver arrangements need operator review.
Recalculate after editing rather than using an earlier result.
Replace fictional data with a real checked quote before retaining a result as a contracting record.

For a one-off event and group cost sharing, use the charter-bus combinations and group budget calculator.
To combine travel transport with lodging and meals, continue with the travel budget calculator.

Understand the supported range and model limits

  • Use 1–20 service rows and 1–31 common working days; each row accepts 1–500 passengers and 1–100 passenger seats.
  • Positioning and turnaround inputs each accept 0–720 minutes or unknown; the extended occupied interval must exceed zero and be no longer than 24 hours.
  • The monthly allowance accepts 0–310,000 vehicle one-way trips or unknown, and replacement volume accepts 0–10,000 trips.
    Individual money inputs accept whole KRW 0–1,000,000,000 or unknown.
  • These are application input and arithmetic limits, not legal passenger capacities, permitted driving or rest limits, or standard industry prices.

The model does not assign individual vehicles or drivers, optimize routes, predict congestion, or estimate standby probabilities.
Deposits, payment-date cash flow, cancellation charges, refunds and penalties are not automatically included in the monthly total.
Changing ridership, different weekday patterns, vehicle-specific rates, nonlinear discounts and additional-driver arrangements require calculations fitted to the actual contract.

Frequently asked questions

Does this provide an average monthly commuter-bus price?

Enter the amounts and inclusions from an actual received quote.
The fictional figures are not market rates, and no universal regional, vehicle, distance or time-of-day prices are built in.

Does a peak of three prove that three buses can operate the timetable?

It is a lower bound from the entered occupied intervals.
The operator must separately review route connectivity, empty movement, driver rest and changes, standby vehicles and breakdown response.

Why do an ending and a starting interval at the same time not overlap?

The calculation excludes the end of an occupied interval.
Enter any required turnaround or movement time explicitly; matching clock times do not guarantee an immediate real-world connection.

Should I enter zero when positioning time is unknown?

Leave it blank to retain the unresolved warning.
A blank is used as zero only in the provisional calculation, so the peak can be understated.
Use zero when the operator has confirmed that no such occupancy is required.

Is the monthly base a price for one vehicle?

It is the base amount for the whole timetable’s monthly contract.
If only a per-vehicle price is available, establish the contracted fleet and total base with the supplier first.
The calculator does not multiply it by the peak again.

Can I add the full fare for a replacement bus?

Enter only the incremental amount beyond costs already counted in the base or excess charge.
Check the settlement terms to avoid adding the full replacement fare or a duplicate regular service row.

Why can a total appear with an unknown excess rate?

When a confirmed allowance covers all trips, the current excess volume and charge are zero.
An actual excess with an unknown rate, or an unknown allowance itself, leaves the relevant charge and confirmed monthly total unresolved.
The same zero-volume principle applies to replacement trips.

Can the reference cost per boarding be charged directly to employees?

It is an internal allocation weighted by vehicle one-way trips, not an employee invoice.
Distinguish boardings from distinct employees and review actual usage and company support or contribution arrangements separately.

Source review date and the next contracting step

The public evidence and calculation scope were checked on 2026-11-17.
The Korean laws below provide context for checking transport terms and contract contents; they do not prescribe the monthly base, excess rate or replacement price.
Check the actual provider’s applicable terms and current written quote.

  • Passenger Transport Service Act, article 9: National Law Information OPEN API current-effective text MST286391, effective 2026-07-01, concerning reporting of transport terms.
    The future 2026-11-30 text returned by the promulgated-text version for the same MST was not applied early.
  • Enforcement Rule, article 30: MST289863, effective 2026-09-15, concerning items to include in transport terms, such as fares, refunds and transport liability.
  • Seoul charter-bus association transport terms: the published supplement is effective 2023-01-01; articles 2, 7, 9, 10 and 14 provide context on negotiated fares, schedules, capacity, driver rest, contract contents and changed-service fares.
    These are not a national price table or identical terms for every provider.
  • Transport-contract notice: published 2024-12-04, this concerns including cancellation charges in strike-replacement bus contracts.
    It is not evidence of a universal monthly or replacement-service rate.

Send the review and request a revised written quote

Save the timetable and result, then ask the operator to verify actual passenger capacity, departure and arrival times, positioning, turnaround, driver rest and standby arrangements.
Record the monthly base, allowance, excess unit, replacement increments, other extras, tax-inclusive scope, quote validity and cancellation terms in writing.
After changes to passengers, days, routes, times or contract conditions, calculate again from the updated original rather than reusing the saved result.

Related calculators