Building Management Invoice Check
Check actual service, vacancy deductions and receipts against one monthly invoice in KRW.
Your contract terms · tax entered separately · KRW
Common invoice amounts
Blank means unconfirmed; 0 means a confirmed zero. Enter service fees and expenses below excluding tax. Do not duplicate the fixed fee in service base fees.
No tax rate is applied automatically. Confirm taxable scope and separate tax against the contract and tax invoice.
Agreed and actual service
Direct delivery and substitute work must not overlap. Quantities in different units are never added together.
Service 1
Credited delivery = direct delivery + approved substitutes. Unapproved substitutes stay outside credited delivery and on the checklist.
Editing quantities or settlement terms clears this verification.
Related calculators
- Commercial Facility Integrated FM Outsourcing vs In-House TCO CalculatorCompare outsourced integrated facility management with an in-house team using monthly cash flow, nominal and present-value TCO, equivalent cost, break-even thresholds, and fixed stress cases.
- Korea Commercial Building Management Fee & Vacancy Share CalculatorAllocate Korean commercial-building management fees by exclusive area, metered use, or equal unit share, then reconcile vacancy, owner, tenant, and VAT amounts.
- Office Cleaning Outsourcing vs Direct Hire Cost CalculatorCompare directly hired office-cleaning staff with an actual Korean vendor quote over the same area, worker count, visits, service hours, and horizon. The dedicated bilingual calculator reuses one pure KRW function for paid hours, wage, company-specific employer burden, an optional retirement-benefit planning reserve, leave and absence cover, supplies, equipment, recruiting, training, health management and internal oversight, plus vendor setup, monthly base, service-hour fees, supplies add-ons, annual extras and retained coordination. It solves total, monthly, per-service-hour and per-pyeong cost, three rate thresholds, horizon sensitivity and cumulative crossover. The guide preserves the 2026 KRW 10,320 minimum-wage notice, Minimum Wage Act Article 6, Labor Standards Act Articles 18, 55 and 60 and Enforcement Decree Article 30, Employee Retirement Benefit Security Act Articles 4 and 8, Occupational Safety and Health Act Articles 63 and 64, and Worker Dispatch Act Article 2 as checked on July 31, 2026, without inventing a market-average cleaning rate, statutory combined burden, paid-hour entitlement, vendor compliance or legal classification.
- Security Guard Outsourcing vs Direct Hire TCO CalculatorCompare direct-hire facility-security staffing with a licensed Korean provider quote over the same posts, operating days, hours, shifts, handover, and horizon. Separate monthly post-service capacity from paid wage hours, then compare required FTE, non-recoverable VAT, TCO, unit costs, and break-even thresholds with editable KRW inputs. This Korea-based 2026 planner does not decide licensing, working-time, tax, safety, temporary-agency-work, or contract compliance.
- Korea Electrical Safety Management Outsourcing vs In-House Cost CalculatorPre-screen 2026 Korean electrical safety agency-service capacity, then compare an itemised outsourced quote with loaded in-house appointment cost using annual and present-value TCO, cost per visit, and a break-even monthly fee.
- Korea Fire Safety Manager Outsourcing vs In-House Cost CalculatorPre-screen the limited outsourcing classes under 2026 Korean fire-prevention law, then compare an actual registered-provider quote and retained supervisor cost with loaded in-house appointment, assistant, education, relief, and vacancy cost.
Reconcile a building-management invoice against actual delivery
A monthly contract amount alone does not establish that a building-management bill matches the work delivered.
Check promised hours or visits, approval of replacement staff and expenses already included in the basic fee.
This calculator helps building owners, shop operators and management staff separate reviewed charges from amounts needing more documents for one service month.
Use it after delivery and before approving the monthly invoice, with the work ledger, visit reports, substitution approvals and receipts at hand.
It serves a different decision from choosing an outsourced FM contract on long-term total cost.
Results are contract-input arithmetic in KRW, using South Korean legal context verified in 2026.
They do not determine adequate staffing, quality, employment relationships, safety or legal payment liability.
Align the service month and scope first
- Find each duty’s agreed quantity, basic fee, deduction rule and minimum charge in the contract and amendments.
- Reconcile attendance, work and visit reports into non-overlapping direct, approved-substitute and unapproved-substitute quantities.
- Confirm the extra quantities and rates agreed with the purchaser, then check expense inclusion, approval and evidence limits.
- Gather the separate fixed management fee, confirmed separate tax, invoice total and payments to date for the same month.
Prior-month carryovers, deposits or next-month advances can change the meaning of a balance if mixed into current service charges.
Request an itemized monthly statement before reconciling them.
The fixed management fee field is for a separate charge, not a second entry of management costs already included in the service-line basic fees.
Agreed quantities, direct delivery and replacements
Keep a consistent unit per duty
Separate duties such as guarding, cleaning and facility visits when they have different settlement rules.
Select hours, person-days or visits to match the contract and use the same unit for agreed and delivered quantities.
A person-day combines the number of people and working days; it is not merely a headcount.
Hours and visits are not added into one aggregate shortage.
Avoid overlapping substitute records
Direct delivery is work by the regular assigned personnel.
Approved substitutes represent replacement or make-up delivery confirmed as creditable under the contract.
Unapproved substitutes remain a separate record.
Do not add the same hours from both attendance and substitution reports.
Unapproved delivery is neither automatically credited nor automatically established as legal non-performance.
The form supports up to 12 service lines.
Agreed quantity must be greater than zero.
Quantities accept up to two decimal places and a maximum of 1,000,000 units.
Amount inputs are whole won, with a per-input maximum of KRW 10,000,000,000.
Confirm that the ledger and settlement rules have been checked before treating a service line as fully reviewed.
Apply only the deduction rule confirmed in your contract
The calculator does not impose one absence threshold or daily-proration denominator on every building-management agreement.
Check whether payment is fixed for the duty or linked to actual service time, and how holidays, leave, training and replacement delivery are treated.
If a shortage exists and its deduction rule is unknown, the line remains unresolved rather than assuming a zero deduction.
No deduction
Select this when the confirmed contract has no monetary deduction for the shortage being reviewed.
Deduction is zero.
Do not select it simply because the deduction clause has not yet been located.
Per-unit deduction
Multiply the shortage by the contractual deduction rate.
Match a per-hour, per-person-day or per-visit rate to the line unit.
The entire monthly management bill is not the per-unit deduction rate.
Basic-fee proportion
Multiply the service-line basic fee by shortage divided by agreed quantity.
Use it only if that is the actual agreement.
It is a selectable contractual formula, not a universal statutory daily deduction.
Service amount, minimum charge and approved extras
- Credited delivery = direct delivery + approved substitute delivery
- Shortage = max(0, agreed quantity − credited delivery)
- Per-unit deduction = round(shortage × deduction rate)
- Proportional deduction = round(basic service fee × shortage ÷ agreed quantity)
- Confirmed service amount = max(minimum charge, basic service fee − deduction) + round(approved extra quantity × extra rate)
The minimum is a floor for the basic service fee after deduction.
Approved extras are added after that floor, so this tool does not implement a minimum on the combined amount including extras.
The minimum cannot exceed the basic service fee.
Enter 0 after confirming there is no minimum.
Even when the calculated deduction exceeds the basic fee, the resulting basic component does not fall below the minimum.
Approved extra quantity cannot exceed credited delivery above the agreed quantity.
More delivery does not automatically create a charge: only agreed extra quantity and its rate are added.
If approved extra quantity is zero, the extra rate may be blank.
Products and proportional deductions are rounded half up to whole won before summing.
A contract requiring truncation or a different settlement order needs a separate check.
Separate approved expenses, included duplicates and pending amounts
Use up to 20 expense rows for consumables, parts, travel, emergency calls or other actual costs.
Claimed amount is the additional amount requested for this month.
Approved evidence amount is the amount you have reviewed after applying receipts, purchaser approval and contractual limits.
A receipt total is not automatically an approved amount.
Check other sites and service months before entering it.
| Classification | Treatment in this review | Check against |
|---|---|---|
| Approved separate | Recognize the smaller of claim and approved evidence; excess stays pending | Separate-charge terms, approval, receipt and limit |
| Included duplicate | Separate as duplicate, without adding another charge | Consumables and equipment included in the basic fee |
| Pending | Keep the claimed amount in pending expenses | Missing evidence and purchaser approval |
| Excluded | Exclude according to the classification you confirmed for this review | Exclusion agreement, service month and responsible payer |
For an approved-separate claim of KRW 120,000 with approved evidence of KRW 100,000, the reviewed amount is KRW 100,000 and KRW 20,000 stays pending.
Included-duplicate and excluded classifications do not establish a legal right to refuse payment.
Request the basis for disputed costs and resolve the agreement or legal position separately.
Keep VAT, invoice total and payments on consistent bases
Use service fees, the fixed management fee and expense amounts on a consistent basis without duplicating the tax entered separately.
The reviewed supply subtotal adds confirmed fixed fees, service amounts and approved expenses.
Add the confirmed separate tax amount to obtain the confirmed total.
Invoice total and payments to date are tax-inclusive so the differences compare like amounts.
Articles 29 and 30 of the Korean Value-Added Tax Act provide context for the tax base and rate.
The tool does not automatically apply the general 10% rate to every line.
Calling a charge an actual expense does not by itself make it non-taxable.
Check taxable scope, exempt services, mixed invoices, tax-inclusive presentation and any tax-invoice adjustment with the supplier or tax adviser.
The example tax amount is fictional, not a substitute for your own confirmed tax.
Worked example: 8 missing hours and 1 approved extra visit
This fictional contract demonstrates arithmetic, not market building-management prices.
The hourly duty has 160 agreed hours, 144 direct hours, 8 approved substitute hours and 4 unapproved substitute hours.
Its basic fee is KRW 3,200,000, the deduction rate is KRW 20,000 per missing hour and the minimum is zero.
Credited delivery is 152 hours, leaving an 8-hour shortage.
The 4 unapproved hours remain a separate record to check.
| Item | Reviewed calculation | Amount (KRW) |
|---|---|---|
| Hourly duty | 3,200,000 − 8 × 20,000 | 3,040,000 |
| Visit duty | 4 agreed visits, 5 delivered; 400,000 basic + 100,000 approved extra | 500,000 |
| Separate fixed management fee | Confirmed amount not duplicated in duty fees | 100,000 |
| Approved separate expense | 120,000 claim and 120,000 approved evidence | 120,000 |
| Reviewed supply subtotal | Confirmed duties, fixed fee and expense | 3,760,000 |
| Confirmed separate tax | Amount confirmed by the example user | 376,000 |
| Confirmed total | Partial reviewed amount excluding pending expenses | 4,136,000 |
An included-duplicate expense of KRW 50,000 is not added, and a pending expense of KRW 30,000 is shown separately.
Even with an invoice of KRW 4,224,000 and payments of KRW 1,000,000, the final invoice difference and balance stay unresolved while that expense remains pending.
If the user subsequently confirms exclusion of the KRW 30,000 for this review, the confirmed total remains KRW 4,136,000, invoice difference becomes KRW 88,000 and balance becomes KRW 3,136,000.
Distinguish a partial subtotal from the final balance
A visible total can still be incomplete
Unresolved service lines are not confirmed as zero; only reviewed lines contribute to the subtotal.
Pending amount sums only unresolved expenses whose claim amounts are known.
It is not a ceiling covering unpriced services.
Do not treat partial subtotal plus pending expenses as the maximum possible monthly invoice.
Read two different differences
A confirmed settlement requires the fixed fee, separate tax, reviewed service and expense lines, and no pending expense balance.
Once that settlement is confirmed, entering the invoice total enables invoice difference: invoice total minus confirmed total.
Entering payments enables balance: confirmed total minus payments to date.
Each comparison is independent, so an unknown invoice total does not prevent a balance based on known payments.
These answer different questions and must not be netted together as inputs.
A positive invoice difference prompts a check for approved extras omitted from the ledger, another month’s carryover, tax differences or duplicate expenses.
A negative balance prompts a payment-record check and discussion of a refund, next-month credit or adjustment.
Neither displayed difference establishes a legally payable debt or refund right.
Enter, preview, edit and save the reconciliation
- Start with the monthly fixed management fee, then complete the service ledger. Enter 0 only after confirming there is no charge; leave unknown amounts blank.
- In expenses, check included duplicates and approval evidence. Moving between steps preserves each row so you can alternate between documents.
- Read the partial subtotal and pending items in the result, then return to editing to correct the relevant row. If quantities change, recheck approved extras and confirmation status.
- The example preserves your existing form and step before opening fictional values. Returning from it restores your ledger. Keep the example label in view to avoid confusing sample figures with your invoice.
- Download the reconciliation and checklist as TXT and send it with the contract and evidence to the supplier. The file does not replace settlement approval or legal advice.
Common situations in a delivery ledger
Make-up work after an absence
Deducting the original absent day without checking approved make-up work can adjust the same shortage twice.
Confirm that another day’s delivery is allowed, covers the same duty and uses the same unit before recording approved substitution.
More credited work does not by itself justify adding an extra fee as well.
Consumables billed again
Check whether cleaning chemicals, bags, gloves or routine inspection equipment are included in the agreement.
Keep separately approved special parts apart from routine consumables.
Split receipts into separate expense rows when their approval scope differs, making it easier to explain the duplicate and recognized amounts.
The number of people on site may match the staffing schedule while credited hours or visit scope differs.
Conversely, fewer people do not necessarily imply a deduction when a contract pays a fixed amount for an agreed result.
Align the billing unit and acceptance method first.
Settlement between purchaser and service company is distinct from deductions from an individual worker’s wages.
Contract scope and calculation limits
The supported order deducts the shortage from each service-line basic fee, applies that line minimum, then adds approved extras.
It does not automatically implement a combined minimum for duties, tiered rates, time-band premiums, consecutive-absence conditions, penalty caps or retrospective insurance settlements.
If your contract uses a different order, request a separate settlement schedule rather than forcing its amounts into these inputs.
Civil Act Article 105 provides context for party intention and non-mandatory provisions, Article 664 for contracts for work, and Articles 683, 686 and 688 for mandate reporting, remuneration and necessary expenses.
This tool does not classify your agreement as a contract for work or mandate, or decide whether a provision applies.
Missing approval or receipts do not automatically establish the absence of a legal payment obligation.
Special rules for apartment management or public procurement are not determined automatically.
Frequently asked questions
Can I deduct the entire monthly management bill in proportion to missing staff?
This tool does not apply that as a universal rule.
Select no deduction, a per-unit deduction or a proportional deduction only after checking the rule for that service line.
It does not reduce the separate fixed management fee or other duties automatically.
Contract penalties and damages are outside this calculation.
Why does a shortage remain after someone covered the absence?
Credited delivery includes direct delivery and approved substitute delivery.
Unapproved substitute quantities are shown separately and are not automatically credited.
Check qualifications, hours, approval and whether the contract permits make-up delivery.
Do not count the same hours in direct and substitute records.
Does a receipt establish the entire reimbursable amount?
Also check the separate-charge agreement, approval and contractual limits.
An approved-separate expense contributes the smaller of the claimed amount and the approved evidence amount.
Any excess stays pending.
An expense already covered by the basic fee should be classified as included duplicate.
What is the difference between pending and excluded?
Pending means approval or evidence is unresolved, so final reconciliation remains on hold.
Excluded records the classification you have confirmed with the counterparty for this review.
Neither status automatically determines that there is no legal payment obligation.
Review the contract and facts separately if the amount is disputed.
Does the minimum charge also apply to extra delivery?
This tool applies the minimum to the basic service fee after its shortage deduction, then adds approved extra delivery.
The minimum cannot exceed that line basic fee.
A minimum covering the total including extras, or several duties together, uses a different contractual calculation and requires separate reconciliation.
Is a blank treated as zero?
A blank is unknown; an explicitly entered 0 is a confirmed zero.
Enter 0 after checking that there is no management fee, separate tax or payment to date.
A zero approved-extra quantity does not require an extra rate.
If a shortage exists but its necessary deduction rule or rate is unknown, that line remains unresolved.
Does the calculator automatically add 10% VAT?
No.
Article 30 of the Korean Value-Added Tax Act gives the general 10% rate, but taxability and tax-inclusive treatment of the services and expenses must be checked separately.
Use line amounts that do not duplicate separately entered tax, and enter only the confirmed separate tax amount.
Invoice total and payments to date are tax-inclusive.
What does a negative invoice difference or balance mean?
Invoice difference equals invoice total minus the confirmed total.
A negative value means the invoice is below the reviewed amount.
Balance equals confirmed total minus payments to date, so a negative balance is an overpayment reference.
It does not establish a refund right.
Check payment timing, other months and previously applied adjustments.
Official sources and version date
Current Korean statutes and the relevant articles were verified through the National Law Information OPEN API on 2026-11-19.
The Civil Act is law ID 001706, MST 284415, effective 2026-03-17.
The Value-Added Tax Act is law ID 001571, MST 276117, effective 2026-01-02.
Deduction rates, minimum charges and extra fees are user-confirmed contract terms, not universal rates set by these statutes.
Recheck applicability after contract renewals or legal amendments.
- Civil Act Article 105 and Article 664: party intention and contracts for work
- Civil Act Article 683, Article 686 and Article 688: mandate reporting, remuneration and necessary expenses
- Value-Added Tax Act Article 29 and Article 30: tax base and general-rate context
Use the checklist to resolve the next invoice
Ask the supplier to confirm shortage quantities and deduction rules, unapproved substitutes, evidence excess and included duplicates line by line.
When a revised invoice arrives, recheck separate tax and payments to date, and record whether any expense could be charged again next month.
Keep agreed amounts separate from disputed amounts when using the reconciliation.
For a new contracting decision, compare long-term cost with the integrated FM outsourcing versus in-house TCO calculator.
To allocate reviewed building charges across units, use the commercial-building fee and vacancy-share calculator.