Accounting Software Plan Billing Calculator

Compare actual quotes by company codes, sites, ledgers, users, documents and connections. Check required features, usage limits, monthly and annual payments in KRW.

Enter and verify your actual quotes. No brand price or tax rate is built in. All amounts are KRW. Unknown terms are excluded from the lowest-price ranking. Reset the example before entering actual quotes.
Shared monthly demand and required features

Use whole counts from 0 to 1,000,000. Company codes and sites are distinct. Included quantities apply to the entered billing scope; separate company quotas are not automatically shared.

Only document volume varies from zero to this limit for the first two plans. Other demand and required features stay fixed.

Plan A

All amounts are KRW. Use 0% surcharge for tax-inclusive amounts. Normalize mixed tax bases before entry. Annual billing uses the quoted total without applying a second base-fee discount.

Feature support

Included quantities and overage terms

Company codes · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Business sites · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Ledgers · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Standard users · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Add-on users · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Documents per month · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Connected accounts · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Plan B

All amounts are KRW. Use 0% surcharge for tax-inclusive amounts. Normalize mixed tax bases before entry. Annual billing uses the quoted total without applying a second base-fee discount.

Feature support

Included quantities and overage terms

Company codes · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Business sites · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Ledgers · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Standard users · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Add-on users · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Documents per month · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Connected accounts · Unknown

Only excess units are rounded up into blocks. The later tier is progressive and does not reprice earlier blocks. A zero price means a confirmed free allowance.

Fees and minimums accept 0–1,000,000,000 KRW; block counts accept 0–1,000,000. Empty numeric fields are invalid rather than zero. Included quantities reset monthly without carryover.

Related calculators

Compare accounting plans beyond the advertised base fee

The Accounting Software Ledger, Location and Usage Plan Billing Calculator checks two or three actual quotes against the same workload.
A free or inexpensive base subscription can still carry additional charges for company codes, ledgers, add-on users, document issuance or connected accounts.
Check required functions and quantity limits first, then compare the first payment and the full first-year bill.

This is useful for a small business choosing its first system, an owner adding locations, or a family member helping an operator review a renewal.
It also puts a monthly renewal quote and a prepaid annual offer on the same 12-month horizon.
The calculator does not fetch live brand prices or recommend a supplier: every amount comes from your quote or an explicitly hypothetical example.
Both language versions use KRW, with no currency conversion.

The decision the results support

Identify which eligible plan has the lowest first-year bill for the functions and capacity you actually need.
An annual offer can have a lower total and a much larger first payment, so average monthly cost alone is insufficient for cash planning.
When conditions remain unknown, use the saved results to ask the supplier for written confirmation before selecting a plan.

Keep seven quantity axes separate

Company codes, locations and ledgers

A company code may represent a separate subscription or company account, while several locations may belong to one company code.
For ledgers, enter the number of independent units defined by the supplier.
Do not assume that business registrations, company codes, shops and ledgers are interchangeable counts.
Confirm which unit triggers a new subscription and which triggers only an add-on charge.

General users and add-on users

Unlimited general ERP users do not necessarily include unlimited groupware, email, payroll or other paid add-on seats.
Count people who can use the main application separately from people assigned a paid add-on.
One person can legitimately appear in both axes when the contract charges both, so confirm the seat definition rather than removing that overlap automatically.

Documents issued each month

Use the contract definition of an invoice, electronic document or other billable issuance.
Entering a journal entry and sending a document to an external recipient may be different events.
Ask whether cancellations, reissues and transactions created by an integrated app count toward the allowance.
Then use the same monthly workload for every quote.

Connected accounts

Count the bank, card, sales-channel or other connected accounts that are billable under the quote.
A supplier may count institutions, individual accounts or connections differently.
Check whether multiple bank accounts at one institution require multiple paid connections, and avoid counting the same connection twice.
Do not assume that every integration is free.

The same quantities repeat in every month of the model.
If a business has seasonal document volume, calculate and save a normal-month case and a peak-month case separately.
Allowances apply to the total billing scope entered here; the model does not transfer unused capacity between companies when their allowances cannot be shared.
For separate company-level limits or uneven workloads, obtain a supplier-confirmed aggregate quote instead of pooling the allowances yourself.

Required functions come before price ranking

Select the functions the business needs: electronic document issuance, bank and card synchronization, data export, and closing or reporting.
For each plan, mark every selected function as supported, unsupported or unknown.
An unselected function does not make a plan ineligible, but an unsupported required function does, even when the calculated bill looks attractive.

  • Eligible: quote conditions and all quantity rules are confirmed, the required functions are supported, and hard limits are met.
  • Unknown: a price condition, billing axis or required function still needs confirmation.
    A reference amount can be displayed, but this plan is excluded from the confirmed lowest-cost selection.
  • Ineligible: a required function is unsupported or a hard limit is exceeded.
    Reduce the required scope or request a different plan before treating it as a usable offer.

For export, check the file format, whether attachments are included and how long access remains available after cancellation.
A functional support label does not determine filing eligibility, professional review requirements or the accounting suitability of your workflow.

Four quantity rules and rounded billing blocks

  • Unlimited: no quantity overage is charged for that axis.
    Unlimited general users do not imply unlimited documents, locations or add-on seats.
  • Metered overage: usage beyond the included allowance is rounded up to the contract block size and charged.
    Use this only when the supplier has confirmed an overage rule and price.
  • Hard limit: demand above the allowance makes the plan ineligible.
    Do not invent an overage price to imply that extra usage is permitted.
  • Unknown: leave the condition unresolved rather than converting it into free or unlimited usage.

Block and progressive-tier formulas

Excess quantity = max(demand − included allowance, 0)
Billed blocks = ceil(excess quantity ÷ block size)
Single-rate overage = billed blocks × price per block
Two-tier overage = min(billed blocks, first-tier block count) × first-tier price + max(billed blocks − first-tier block count, 0) × second-tier price

With 100 documents included and KRW 1,000 per additional block of 10, both 101 and 110 documents cost KRW 1,000 in overage; 111 cost KRW 2,000.
Two tiers are progressive: only the blocks above the first-tier count use the second price.
The model never applies the final-tier price retroactively to all excess usage.
A first-tier block count of 0 selects a single rate, and allowances reset each month without rollover.

Monthly billing, annual prepayment, minimums and discounts

For a monthly plan, the promotional percentage applies only to the monthly base fee during the first specified number of months.
It does not also discount overages, setup fees or the monthly minimum.
For an annual plan, enter the quoted 12-month prepaid amount directly: the monthly promotion is not applied again.
The monthly minimum is a floor after the discounted base fee, or allocated annual base, is combined with monthly overages.

Monthly plan

Normalized monthly charge = max(discounted monthly base + monthly overages, monthly minimum)
The normalized amount is paid each month, with the setup fee added once in month 1.
Check the normal monthly amount after the promotion ends as well as the introductory price.

Annual plan

Normalized monthly charge = max(annual prepayment ÷ 12 + monthly overages, monthly minimum)
The full annual base is paid in month 1; each month also pays the normalized charge minus annual prepayment ÷ 12.
An allocated monthly base is not a promise that only that amount is collected each month.

Use KRW throughout and enter only the contract surcharge percentage you have confirmed.
If entered amounts already include tax, use 0% to avoid adding the same amount again.
If a quote mixes tax-inclusive base fees and tax-exclusive overages, convert every item to one consistent basis before entering it.
The calculator does not choose a statutory tax rate, determine deductible input tax or calculate a filed tax liability.

Each monthly invoice combines that month’s payment and any month-1 setup fee, applies the contract surcharge, and rounds to the nearest KRW.
The 12-month total is the sum of these rounded invoices; the monthly average is that total divided by 12.
The normal monthly charge, average monthly cost and actual first invoice can therefore be different amounts.

Worked example: monthly A versus prepaid annual B

These are hypothetical test values, not market benchmarks or brand prices.
Both plans support all required functions, every axis except A’s documents is unlimited, and monthly minimums and contract surcharges are 0.
Document demand stays at 150 per month.

Hypothetical monthly plan A and annual plan B billing comparison in KRW
ItemMonthly AAnnual B
Quoted baseKRW 20,000 / monthKRW 240,000 / year
Promotion50% of base for 3 monthsNone
Setup feeKRW 10,000KRW 0
Monthly document overageKRW 5,000KRW 0
Month 1 invoiceKRW 25,000KRW 240,000
Each invoice in months 2–3KRW 15,000KRW 0
Each invoice in months 4–12KRW 25,000KRW 0
12-month totalKRW 280,000KRW 240,000

A includes 100 documents and charges KRW 1,000 per additional block of 10, so 150 documents generate five blocks and KRW 5,000 in monthly overage.
Its first invoice combines KRW 10,000 of discounted base, KRW 5,000 of overage and KRW 10,000 of setup.
B costs KRW 40,000 less over the first year but requires a larger initial payment.
Check available cash and cancellation conditions before deciding whether to prepay.

At what document volume does the cheaper plan change?

The crossover analysis changes only document demand for the first two plans and finds the first integer quantity where the strict 12-month price advantage reverses.
It checks quantities from 0 to your selected ceiling, up to 100,000 documents.
The other six demands, required functions, setup fees, promotions and annual terms stay unchanged.
A tie is not treated as either plan’s advantage, and eligibility is checked again at each candidate quantity.

The example first reverses at 111 documents

Up to 100 documents, A totals KRW 220,000 for the year.
At 101–110 documents, one additional block each month raises A to KRW 232,000.
At 111 documents, two blocks each month raise A to KRW 244,000, exceeding B’s KRW 240,000.
The first change of cheaper plan is therefore at 111 documents per month.

No crossover within the scanned range does not establish a permanent advantage at every possible volume.
Progressive rates, monthly minimums and block rounding can produce later reversals.
Unknown terms or a hard limit can also prevent a valid comparison throughout the range; treat that outcome as a condition or range limitation.
The third plan is included in the general comparison table, but this document-volume analysis compares only the first two plans.

How to transfer actual quotes into the calculator

  1. Confirm the actual monthly workload and agree on the definitions of company code, location and ledger with the person managing the accounts.
  2. Select the functions required during the contract and check each plan’s support status.
  3. Enter the monthly base or annual prepayment, setup fee, monthly minimum, and the scope and duration of any promotion.
  4. Choose unlimited, metered overage, hard limit or unknown separately for all seven quantity axes.
    For metered usage, enter the allowance, block size and progressive prices.
  5. Normalize tax-inclusive and tax-exclusive figures to one basis, then enter the confirmed contract surcharge.
    Use 0 only for an explicitly free item; do not substitute it for a blank or unknown condition.
  6. Review the first invoice, full 12-month total, normal monthly charge and overage breakdown, comparing eligible plans with one another.
    Replace every hypothetical example value before treating the result as an actual quote comparison.
  7. Save the TXT report and ask the supplier to confirm unresolved items, export options, cancellation, refunds and renewal terms.

Check whether a “free” offer applies only to the base subscription or to every function and quantity you need.
If a public page and a sales quote differ, use the confirmed terms that will govern your contract.
Public illustrative prices should not be treated as your guaranteed bill.

Three practical comparison situations

Adding a location

First establish whether the new operation is another location within the existing company code or a separately subscribed company.
Do not add allowances together when sharing users or document capacity between companies is unconfirmed.
Save demand before and after the expansion to explain which extra charges are caused by the new location.

Moving from free to paid

Identify whether the upgrade is required by document capacity or by a missing function.
Check whether the higher plan removes quantity limits or merely increases the base fee while retaining overage charges.
A volume crossover is useful only after the plan can actually perform the required work.

A promotion ending or an annual renewal

Do not assume that an introductory first-year promotion continues into the next contract.
Enter only the promotional months that apply after the comparison start date.
Unused annual balances, refunds and migration charges are outside this model and need separate contract review.

Model limits and checks before signing

  • Demand and contract prices stay constant for 12 months.
    Mid-month enrollment, prorated billing, renewals, rollover and seasonal usage are not automatically modeled.
  • Retroactive all-volume tier prices, discounts on individual add-ons and non-shareable company allowances may not fit the progressive pooled model.
    Confirm an appropriate aggregate quote before simplifying such a contract into these fields.
  • Unknown prices and functions are not treated as free or supported.
    A reference amount for an ineligible plan is not a purchasable quotation.
  • The surcharge is a confirmed contract input, not a tax-deduction or final tax-liability calculation.
    Supplier rounding or line-item truncation may differ from this invoice-level nearest-KRW method.
  • Cancellation penalties, prepaid refunds, transition training, migration, internal staff time and long-term investment returns are outside this comparison.
    Obtain separate quotes or use the related tools for those decisions.

Frequently asked questions

Do unlimited users make every other item free?

No.
General users, add-on seats, document volume and locations can have separate billing rules.
Confirm each of the seven axes independently.

How is zero different from unknown?

Zero means the contract explicitly confirms no charge for the item.
Unknown means the condition still needs checking, so the plan is excluded from the confirmed lowest-cost selection.

Can I enter an overage price for a hard limit?

Do not invent a charge when the contract does not permit extra usage.
A plan exceeding its hard limit is ineligible; request a higher plan or another quote.

Is an annual plan’s monthly average the actual monthly invoice?

No.
The annual base is paid in full in month 1, with overages or minimum-charge differences paid separately each month.
Use the first invoice and monthly schedule for cash planning.

Is the document crossover a permanent break-even point?

No.
It is the first strict advantage reversal between the first two plans within the selected range.
Block and tier rules can cause later reversals, and the third plan is not part of that scan.

May I combine allowances from separate companies?

Not when those allowances cannot be shared.
Concentrated usage can change the bill substantially, so obtain supplier confirmation of the total billing scope before entering an aggregate allowance.

Does the English version use another currency?

Both versions use the same pure calculation rules and KRW amounts.
Do not enter an unconverted foreign-currency quote or assume that the English page converts currency automatically.

Can I sign as soon as the lowest total appears?

First confirm required functions, export formats, attachment access, cancellation, prepaid refunds and renewal terms.
The output compares costs within your inputs; it does not approve the contract or assess accounting suitability.

Official sources and verification date

Official page content was checked on 2026-11-18.
No separate page revision date was confirmed; public terms should be checked again before entering a contract.
These sources support the distinction between billing axes and allowances, rather than supplying built-in brand prices.

  • ECOUNT pricing policy: distinguishes ERP users and storage from groupware or email blocks, and identifies setup, prepayment and tax-display conditions.
  • ECOUNT additional-company FAQ: distinguishes a separate company code from an additional location.
    Its tax-inclusive display can differ from the pricing page, so normalize figures before comparison.
  • Xero US pricing and conditions: illustrates separate user, document, add-on and base-subscription promotion conditions.
    The US product’s prices are not used as Korean contract rates.

Start with quotes covering the same work

Prepare two actual quotes and enter one consistent workload and set of required functions.
Save the TXT report with all entered conditions and unresolved items, then use it to confirm extra charges, tax display, exports and cancellation with the suppliers.
If you loaded the hypothetical example, replace every sample value before relying on the comparison.